Sony SRS-XB100 Reference Manual

Wireless Speaker
Reference Guide
SRS-XB100
©2023 Sony Corporation
Printed in China
https://www.sony.net/
Model: YY7856E
The term "product" in this document refers to the unit or its accessories.
Do not expose the unit to naked flame sources (for example, lighted
candles).
Do not install the product in a confined space, such as a bookcase or
built-in cabinet.
The nameplate and important information concerning safety are
attached in the following locations:
• the bottom of the unit
Do not expose the batteries (battery pack or batteries installed) to
excessive heat, such as sunshine, fire or the like, for a long time.
Do not subject the batteries to extreme low temperature conditions that
may result in overheating and thermal runaway.
Do not dismantle, open, or shred secondary batteries.
In the event of a secondary battery leaking, do not allow the liquid to
come in contact with the skin or eyes. If contact has been made, wash
the affected area with copious amounts of water and seek medical
advice.
Secondary batteries need to be charged before use. Always refer to
the manufacturer's instructions or product manual for proper charging
instructions.
After extended periods of storage, it may be necessary to charge and
discharge the secondary batteries several times to obtain maximum
performance.
Dispose of properly.
This product has magnet(s) which may interfere with pacemakers,
programmable shunt valves for hydrocephalus treatment, or other
medical devices. Do not place this product close to persons who use
such medical devices. Consult your doctor before using this product if
you use any such medical device.
This unit has been tested and found to comply with the limits set out in
the EMC regulation using a connection cable shorter than 3 m.
Never insert the USB plug when the main unit or charging cable is wet.
If the USB plug is inserted while the main unit or charging cable is wet,
a short circuit may occur due to liquid (tap water, seawater, soft drink,
etc.) or foreign matter on the main unit or charging cable, and cause
abnormal heat generation or malfunction.
5-047-815-41(1)
Model: YY7856E
Licenses
• This product contains software that Sony uses under a licensing
agreement with the owner of its copyright. We are obligated to
announce the contents of the agreement to customers under
requirement by the owner of copyright for the software. Please
access the following URL and read the contents of the license.
https://rd1.sony.net/help/speaker/sl/23c/
• Use of the Made for Apple badge means that an accessory has
been designed to connect specifically to the Apple product(s)
identified in the badge, and has been certified by the developer
to meet Apple performance standards. Apple is not responsible
for the operation of this device or its compliance with safety and
regulatory standards.
Disclaimer regarding services offered by third parties
• Services offered by third parties may be changed, suspended,
or terminated without prior notice. Sony does not bear any
responsibility in these sorts of situations.
Notes on waterproof and dustproof
features
(Read before using the unit)
The supplied accessories are neither waterproof nor
dustproof.
Waterproof and dustproof performance of the unit
The unit, with the cap fastened securely, has a waterproof specification
of IPX7 as specified in "Degree of protection against water immersion"
of the IEC60529 "Ingress Protection Rating (IP Code)", and a dustproof
specification of IP6X as specified in "Degrees of protection against solid
foreign objects".
• The supplied accessories and the connectors of this unit (USB) are
neither water resistant nor dustproof. To reduce the risk of fires or
electric shocks, do not expose the unit to water or droplets while using
any connectors (USB).
Note that malfunctions as a result of water immersion or dust
intrusion caused by misuse by the customer are not covered by the
warranty.
To avoid the deterioration of waterproof and
dustproof performance
Carefully note the precautions below to ensure proper use of the unit.
• This unit does not have a design that is resistant to water pressure. Use
of the unit in a location where high water pressure is applied, such as
in the shower, may cause a malfunction.
• Do not pour high-temperature water or blow hot air from a hair dryer
or any other appliance on the unit directly. Also never use the unit in a
place subject to high temperatures, such as in a sauna or near a heat
source.
CAUTION : Handle the cap with care. The cap plays a very
important role in maintenance of the water resistant and dustproof
performance. When using the unit, make sure that the cap is closed
completely. When closing the cap, be careful not to allow foreign objects
inside. If the cap is not closed completely the water resistant and
dustproof performance may deteriorate and may cause a malfunction of
the unit as a result of water or dust particles entering the unit.
Passive radiator
Cap