Table of Contents
Advertisement
Standard See-Thru Fireplace Natural Gas
HEATSHIELD ASSEMBLY - COUNTER TOP MODEL
58
HEATSHIELD MUST BE GLUED
TO TOP OF FASCIA PANEL USING
HEAT RATED ADHESIVE.
USE HEAT RATED SEALANT/
CAULK TO SEAL ANY OPEN GAPS
AROUND THE PERIMETER OF
THE HEATSHIELD.
NOTE:
Heatshield is required to minimize heat
transfer to the counter top. Dimensions
will vary based on installation, but
should cover entire firepan cavity.
Top of interior fascia panels on rail
#5 is the recommended position
for heat shield. Located 12" below
top of cabinet.
HEAT SHIELD DIMENSIONS (NOMINAL)
45" x 27 1/4"
45"
Heatshield material options
may vary from region to
region. Please contact
your local Unilock Territory
Manager for local options.
Advertisement
Table of Contents
