Update Your Player; Manually Verify Software Status - Philips GoGear SA2925A User Manual

5 Update your player

Your player is controlled by an internal program called the firmware. Newer versions of the
firmware may have been released after you have purchased your player.
A software program called Philips Device Manager checks for firmware updates that are
available on the Internet.
Install Philips Device Manager from your player or download the latest version from
www.philips.com/support.

5.1 Manually verify software status

Attention This procedure will erase the content of the player.
1 Copy the content of the player to the computer as a back-up.
2 Disconnect the player from the computer.
3 Turn off your player.
Ensure the computer is connected to the Internet.
4
Click Start > Programs > Philips Digital Audio Player > GoGear Spark > Philips
5
GoGear Spark Device Manager to launch the Philips Device Manager.
6 On the player, hold the
> The Device Manager enters recovery mode.
7 Click OK to continue.
8 When the display indicates that the process is finished, disconnect the player from the
computer.
> The display shows
9 Wait until the update process is completed on the player.
> The player restarts and is ready for use again.
11 Reconnect the player to the computer.
11 Transfer the back-up content to the player.
OPTIONS button while you connect the player to the computer.
Updating firmware.
25