Page 1
MANUAL Alpha Wet Sanding ® and Polishing Kit Instruction Manual *Tool sold separately Part No: WSPKIT / WPSKIT2V Version 05/2023 www.alpha-tools.com...
Page 2
Alpha Wet Sanding & Polishing Kit Overview ..............3 ® Attaching The WSPKIT To The Variable-Speed Grinder / Sander / Polisher .......4 Attaching The Water Hose Assembly ..................4 Installation Of Easy On-Easy Off Sleeve ................5 Using The Hook & Loop Straps .....................5 Installation Of The GFCI ......................6...
Page 4
ATTACHING THE WSPKIT TO THE VARIABLE-SPEED GRINDER / SANDER / POLISHER ATTACHING THE WATER HOSE ASSEMBLY Attach and tighten the Water Hose Assembly onto the Adapter. Adapter Water Hose Assembly Loc-line Assembly...
Page 5
INSTALLATION OF EASYON-EASYOFF SLEEVE Wrap the EasyOn-EasyOff Sleeve around the Water Hose Assembly and electrical cord. Finish the wrapping procedure until the entire EasyOn-EasyOff Sleeve is secured. USING THE HOOK & LOOP STRAPS NOTE: Use the Hook & Loop Straps as necessary to attach the hose assembly to the Variable- Speed Grinder/Sander/Polisher.
Page 6
INSTALLATION OF THE GFCI Install the GFCI to the power tools power cord as shown. Connect to Power and check the GFCI for proper function. 110V 110V 240V 240V TESTING IN-LINE GFCI UNIT Connect GFCI to the power supply Verify that the indicator lens shows red (indicating output voltage). Press the test button to verify that the red in the indicator lens disappears.
Need help?
Do you have a question about the WSPKIT and is the answer not in the manual?
Questions and answers