Page 1
MANUAL Alpha Wet Sanding ® and Polishing Kit Instruction Manual *Tool sold separately Part No: WSPKIT Version 12/2020 www.alpha-tools.com...
Page 2
Alpha Wet Sanding & Polishing Kit Overview ..............3 ® Attaching The WSPKIT To The Variable-Speed Grinder / Sander / Polisher .......4 Attaching The Water Hose Assembly ..................4 Installation Of Easy On-Easy Off Sleeve ................5 Using The Hook & Loop Straps .....................5 Installation Of The GFCI ......................6...
Page 4
ATTACHING THE WSPKIT TO THE VARIABLE-SPEED GRINDER / SANDER / POLISHER ATTACHING THE WATER HOSE ASSEMBLY Attach and tighten the Water Hose Assembly onto the Adapter. Adapter Water Hose Assembly Loc-line Assembly...
Page 5
NSTALLATION OF EASYON-EASYOFF SLEEVE Wrap the EasyOn-EasyOff Sleeve around the Water Hose Assembly and electrical cord. Finish the wrapping procedure until the entire EasyOn-EasyOff Sleeve is secured. USING THE HOOK & LOOP STRAPS NOTE: Use the Hook & Loop Straps as necessary to attach the hose assembly to the Variable- Speed Grinder/Sander/Polisher.
Page 6
INSTALLATION OF THE GFCI Install the GFCI to the power tools power cord as shown. Connect to Power and check the GFCI for proper function. TESTING IN-LINE GFCI UNIT Connect GFCI to a single-phase AC power supply Verify that the indicator lens shows red (indicating output voltage). Press the test button to verify that the red in the indicator lens disappears.
Page 7
CONNECTING THE WATER SUPPLY Connect to Water Supply - 1 Connect to Water Supply - 2...
Need help?
Do you have a question about the WSPKIT and is the answer not in the manual?
Questions and answers