Table of Contents
Advertisement
Maintenance
Removing debris from brushbar
If the light continues to flash after resetting, the brushbar may still be blocked. Using a pair of scissors, cut
through any threads or hairs caught around the brushbar. To access brushbar:
Press the brushbar reset button again to ensure the blockage is fully cleared.
IMPORTANT: For your safety, never try to access / replace brush bar drive belt. If problem persists please
call our careline: AU 1300 361 505 / NZ: 0800 800 900.
Removing blockages from the Turbo Tool
Press the two side buttons together
and pull apart.
11
(Keep your Vax as good as new)
(VARU1200 model only)
Carefully use scissors to cut
out the blockage.
Vax Service line:
Realign turbo brush sides and
press together.
AU: 1300 361 505
NZ: 0800 800 900
vax
Advertisement
Table of Contents
