Samsung WA45M7050 Fast Track Troubleshooting page 18

Top Symptom Guide
Problem What to
Will Not Start • Plug the unit into the wall outlet. Check for proper voltage.
• Check fuse or reset circuit breaker.
• Push any key to turn on the washer and press the Start/Pause key to run th
• Close door and push the Start/Pause key to run the washer.
• Check if washer is in a pause. soak or suds process. Wait briefly and it may
(If the washer is in suds period. Suds will light up instead of remaining time.)
• Check for restricted drain system. (If there is electrical problem in drain sy
• Check Water Supply.
• Check the line or water valve screen filter.
• Check if PCB connectors are assembled properly.
• Check if CN2 terminals on PCB are in good condition. (Refer to PCB Connec
• Replace PCB.