Changing The Basic Set- Tings; Appliance Care; Preparing For Appliance Care; Calling Up The Appliance Care Programme - Bosch WQB245ALSN User Manual

16.2 Changing the basic set-
tings
Requirement: The display shows all
additional buttons.
To call up the basic settings, press
1.
Basic Settings .
Select the required basic setting.
2.
→ "Overview of the basic settings",
Page 44
To change the value, press
3.
⁠ .
To reset the appliance to the fact-
4.
ory settings, press and hold
for approx. 3 seconds.
Press Basic Settings to save the
5.
settings.
17 Appliance care
The appliance offers cleaning pro-
grammes for basic and intensive ap-
pliance care.
17.1 Preparing for appliance
care
Preparing the appliance for the
appliance care programme
Prepare the appliance before running
the appliance care programme.
Requirements
¡ The drum is empty.
¡ The appliance is in standby mode.
Clean the fluff filter.
1.
→ "Cleaning the fluff filter",
Page 35
Pull out the condensation con-
2.
tainer horizontally and empty it.
→ "Emptying the condensation
container", Page 37
Preparing the condensation
container for the appliance care
programme
If you are draining the condensation
water from the appliance using the
drain hose, prepare the condensation
container before running the appli-
ance care programme.
Remove the stopper from the re-
1.
cess in the top.
⁠ or
⁠
Insert the stopper on the under-
2.
side.
Clean the filter in the condensation
3.
container.
17.2 Calling up the appliance
care programme
Requirement: The appliance care
programme is ready.
→ "Preparing for appliance care",
Page 45
Press ⁠ .
1.
Appliance care en
45