Advertisement
Plug the subwoofer's power cable into an AC outlet (220-240V, 50/60Hz~).
Connect the system to the PC: plug the accompanying audio cable's two phone/RCA connectors (red/white) into the Audio Input sockets on the subwoofer and the other end (green) into the audio output socket (usually green) on your soundcard.
Now plug the satellite speakers into the subwoofer: plug each satellite's photo connector into the relevant Audio Output socket on the subwoofer - red for right, white for the left channel.
Open the remote control's battery compartment. Insert a button battery (CR2025, 3V) into the cover making sure the polarity is correct. Replace the cover with the battery fitted.
Switch the system on (set POWER to ON).
Now playback audio on your PC and adjust the volume as well as the treble and bass levels to suit using the dials on the front of the subwoofer or via the remote control. The Mute button on the remote control mutes the system. The Reset button resets the system back to its factory default settings.
Please note that the remote control requires clear line of sight to the infrared receiver on the front of the subwoofer in order for it to work properly.
This product is only intended as a speaker system for connecting to a computer or other audio source, and is designed for indoor use only. Jöllenbeck GmbH accepts no liability whatsoever for any damage to this product or injuries caused due to careless, improper or incorrect use of the product or use of the product for purposes not recommended by the manufacturer. Place this device near an AC outlet that is easily accessible. This device will only be completely disconnected from the mains once it has been unplugged.
PLEASE NOTE: Listening to audio for extended periods at loud volume levels may cause permanent hearing damage, so check the volume level that has been set on the volume control each time before using the project, and avoid listening to audio at a high volume level.
Only use the recommended battery type. Always replace old or weak batteries promptly. Keep batteries out of children's reach. As an end-user, you are legally obliged to dispose of used batteries correctly. You can dispose of your used batteries free of charge at collection points or anywhere where batteries are sold. Batteries/rechargeables displaying a crossed-out bin symbol must not be disposed of together with household waste. Used batteries may contain harmful substances which may cause environmental damage or harm your health if not stored or disposed of correctly.
Operation of the device (the devices) may be affected by strong static, electrical or high-frequency fields (radio installations, mobile telephones, microwaves, electrostatic discharges). If this occurs, try increasing the distance from the devices causing the interference.
Having technical problems with this product?
Get in touch with our Support team – the quickest way is via our website: www.speedlink.com.
Alternatively, you can email them at: eu-support@speedlink.com.
©2011 Jöllenbeck GmbH. All rights reserved.
SPEEDLINK ®, the SPEEDLINK word mark and the SPEEDLINK swoosh are registered trademarks of Jöllenbeck GmbH.
All other trademarks are the property of their respective owners. Jöllenbeck GmbH shall not be made liable for any errors that may appear in this manual.
Information contained herein is subject to change without prior notice. JÖLLENBECK GmbH, Kreuzberg 2, 27404 Weertzen, GERMANY
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Speedlink GRAVITY THUNDER SL-8267-BK - 2.1 Subwoofer System Quick Install Guide
Advertisement
Need help?
Do you have a question about the GRAVITY THUNDER SL-8267-BK and is the answer not in the manual?
Questions and answers