Philips HTS9800W Firmware Upgrade Manual page 4

Step 4
A pply Upgrade to your Set
1 . Power up the set and insert the prepared Upgrade CDR.
2. The set will automatically start upgrading.
3. Set's FTD will display ERASE. After which
from set.
4. FTD will s how WRITE -> UPG END in about 2 minutes time.
5. The set will go to standby and wake up automatically in disc mode
Y our product is successfully upgraded!
Step 5
V erifying firmware version
To check the rmware version, see Step 1. fi
H elpful hints: If you have any problem, see Troubleshooting.
Firmware upgrade history
V ersion 26
•
The upgra de allows the HTS9800W to have improved CDDA recognition, SCART detection and
Bass/Treble.
the upgrade disc will automatically be ejected. Remove Disc
. Software upgrading is completed
4