(7) Tighten the screws from back side(5 points) and bottom side of guide panel
(8) Assemble the case top screws.
* Bottom side screws 6 EA.
* When the left and right ends, hold case top by hand.
(9) Reverse the module and assemble S-PCB to holder
(10) Assemble the guide panel.
* Remove the fixed tape first, then assemble the case top
*Then assemble T-Con FFC and Cover shield
UP L/R
Down L/R
- 33 -
Copyright ©
LG Electronics Inc. All rights reserved.
Only training and service purposes.
* Assemble the Screws
* Assemble Pad of 4Corner (Reuse).