Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SCHILD Johann AS-5203
Summary of Contents for SCHILD Johann AS-5203
- Page 1 L I M I T E D E D I T I O N I N S T R U C T I O N M A N U A L...
- Page 4 This Limited Edition timepiece is equipped with a Swiss Made self-winding Mechanical Automatic movement manufactured by Adolph Schild. AS-5203 It does not need a battery. It is powered by the motions of the user’s own wrist during the wear of the watch.
- Page 5 A) DISPLAY Hour Hand Hour Hand Minute Hand Screw Down Crown Second Hand Date...
- Page 6 B) PLEASE READ THE FOLLOWING BEFORE UNSCREWING THE CROWN SCREW-DOWN CROWN Screw-down crowns are used to ensure water resistance. ALWAYS be certain that your crown is securely screwed down ( Position [0] is secured. Positions [1], [2] and [3] are not secured for water resistance ).
- Page 7 C) USING THE SCREW- DOWN CROWN Do not pull the crown unless it is UNSCREWED first: TO UNSCREW: Turn the crown anti-clockwise until it turns freely without tension. GENTLY pull the crown out to the other desired positions for watch setting. TO SCREW: Push the crown ALL THE WAY IN (towards the watch) THEN...
-
Page 8: Winding The Mainspring
D) WINDING THE MAINSPRING THIS WATCH IS AN AUTOMATIC WATCH EQUIPPED WITH A MANUAL WINDING MECHANISM. 1. Unscrew the crown by turning it anti-clockwise. 2. When it is in position [1], turn the crown clockwise to wind. Wind 5-10 times and it will start to move naturally after shaking slightly. - Page 9 NOTE: This watch MUST be worn for at least 8 (Eight) hours each day to ensure it is fully wound. An automatic watch will only wind when the watch is on your wrist and your arm moves. Winding the watch by the crown will put power on the spring but not enough to allow the watch to function fully.
-
Page 10: Time Setting
E) TIME SETTING 1. Unscrew the crown and pull it out to position [3]-(2nd click). 2. Turn the crown clockwise to set the correct time. 3. Push the crown in then screw it securely. * Take a.m./p.m. into consideration when setting the hour and minute hands to the desired time. -
Page 11: Date Setting
F) DATE SETTING 1. Unscrew the crown and pull it out to position [2]-(1st click). 2. Turn the crown clockwise to set the correct date. 3. Push the crown in then screw it securely. * Do not set the date between 9:00 P .M. and 4:00 A.M. - Page 12 G) HOW TO USE A DUAL DEPLOYANT CLASP 1. Press the buttons on both sides of the clasp. 2. The Buckle will release and open.
- Page 13 H) HOW TO CHANGE THE BRACELET TO STRAP Quick Release Spring Bar...
- Page 14 Quick Release Spring Bar...
-
Page 15: Care And Maintenance
We advise having your timepiece serviced every 3 or 4 years to ensure long use and trouble free operation. While your SCHILD timepiece has been designed and built to exacting specification, it is important to avoid the following conditions: extreme heat or... - Page 16 Never operate any of the function buttons or crown when timepiece is in contact with water. Avoid exposure to strong magnetic fields or sources of static electricity as these may interrupt the mechanisms inside the watch. It is also important to avoid extreme shock or impact.
-
Page 17: Water Resistance
WATER RESISTANCE The water resistance indicated on your timepiece serves only as a guide. Actual water resistance may vary depending on a number of important factors including temperature, water salinity, and actual use under water. The water resistance of your timepiece may eventually be compromised over time with general wear and tear and the use of your watch under adverse... -
Page 18: Service Log
SERVICE LOG Use this area to record any aftercare of your timepiece. Date Notes: Location... - Page 20 Vo l .1. 03 EN S C H I L D 1 8 9 6 . C O M...
Need help?
Do you have a question about the Johann AS-5203 and is the answer not in the manual?
Questions and answers