Summary of Contents for Energizer EZMO160-210
- Page 1 ORIGINAL INSTRUCTIONS > EN MINI MULTIFUNCTION TOOL EZMO160-210 USER GUIDE CAUTION Read the instructions before using the machine.
- Page 2 ©2023 Energizer. Energizer and certain graphic designs are trademarks of Energizer Brands, LLC and related subsidiaries and are used under license by Builder SAS. All other brand names are trademarks of their respective owners. Neither Builder SAS nor Energizer Brands, LLC is affiliated with the respective owners of their trademarks.
- Page 3 Let’s get started. You’re excited to power up, so we’ll keep this brief!
-
Page 4: Table Of Contents
CONTENTS 1. INTENDED USE..............................5 2. SAFETY INSTRUCTIONS........................... 5 3. DESCRIPTION..............................10 4. CONTENTS OF PACKING..........................10 5. TECHNICAL DETAILS............................13 6. ASSEMBLY................................13 7. OPERATION................................ 14 8. CLEANING AND MAINTENACE........................16 9. DISPOSAL................................16 10. DECLARATION OF CONFORMITY......................17 11. WARRANTY..............................18 12. PRODUCT FAILURE............................19 13. -
Page 5: Intended Use
1. INTENDED USE This machine is intended for grinding, sanding, polishing, wire brushing or cutting on metals, glass, wood and ceramics with the appropriate attachments. Do not use machine attachments for works other than those for which they are designed for! All other applications are expressly ruled out. 2. - Page 6 appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
- Page 7 tool manufacturer. Just because the accessory can be attached to your power tool, it does not assure safe operation. c) The rated speed of the grinding accessories must be at least equal to the maximum speed marked on the power tool. Grinding accessories running faster than their rated speed can break and fly apart.
- Page 8 housing and excessive accumulation of powdered metal may cause electrical hazards. r) Do not operate the power tool near flammable materials. Sparks could ignite these materials. Do not use accessories that require liquid coolants. Using water or other liquid coolants may result in electrocution or shock.
- Page 9 d) Do not position your hand in line with and behind the rotating wheel. When the wheel, at the point of operation, is moving away from your hand, the possible kickback may propel the spinning wheel and the power tool directly at you. e) When wheel is pinched, snagged or when interrupting a cut for any reason, switch off the power tool and hold the power tool motionless until the wheel comes to a complete stop.
-
Page 10: Description
3. DESCRIPTION 1. On/Off switch 2. Speed selector 3. Collet nut 4. Spindle lock button 5. Carbon brush cap 4. CONTENTS OF PACKING Picture Name Quantity Grinding Stones with shank Diamond bit Wood Carving Bit Collets Sanding bands Sanding bands... - Page 11 Mandrel for cut-off wheel Mandrel for felt wheel Sanding shanks Grinding wheels Wet stone Cut off wheels Rubber emery wheel Wrench Polishing compound...
- Page 12 Cut off wheels Sanding paper Felt wheels Felt wheels Felt wheel pointed Drill bits Nylon brush Wire brush Flapwheel Grit L pin...
-
Page 13: Technical Details
5. TECHNICAL DETAILS Model EZMO160-210 Power supply 230V~, 50Hz Power input 160W No load speed 8000-35000/min Collet capacity Max. Ø3.2mm Sound pressure level : 80.4 dB(A) K=3 dB(A) Sound power level : 91.4 dB(A) K=3 dB(A) Vibration level : 3.819 m/s K=1.5m/s... -
Page 14: Operation
NOTE: Never press the locking pin while the tool is running. 6.2 INSTALLING DISC/WHEELS ACCESSORIES NOTE: The tool must not be plugged to a power socket during this operation. Wear gloves during this operation to avoid injury which is ... - Page 15 should only be used for straight cuts. Do not sand or curved holes. If the tool slows down or over-heats you may be applying too much pressure. g) The tool is most effective with clean sharp tools. If more pressure is needed try cleaning or replacing the accessory.
-
Page 16: Cleaning And Maintenace
HSS cutters 9000~35000 Drill bits 4500~35000 Brush 4000~15000 L pin To switch on, push the ON/OFF switch to “I” position. To switch off, push the ON/OFF button to the “0” position. 8. CLEANING AND MAINTENANCE 8.1 MAINTENANCE Always disconnect the device before performing any adjustment or maintenance operation. Disconnect from the power supply immediately if the supply cord is damaged. -
Page 17: Declaration Of Conformity
BUILDER SAS 32 rue Aristide Bergès - Z.I. du Casque - 31270 Cugnaux - France Declare that the Product named below: Mini MultiFunction Tool Model: EZMO160-210 Serial number: 20230504566-20230504965 Meets the requirements of the Council Directives: Machine Directive 2006/42 / EC... -
Page 18: Warranty
11. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 19: Product Failure
12. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 20: Warranty Exclusions
13. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •... - Page 21 NOTES...
- Page 22 NOTES...
- Page 23 NOTES...