Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Mac allister MCSWP2000S-2
Summary of Contents for Mac allister MCSWP2000S-2
- Page 1 设计人员: 梁光灿 邮箱: 制作日期: 2022-12-21 运用软件: Adobe Acrobat 9 Pro guangcan.liang@yat.com TEL:0573-83225888-503 Http:www.yattool.com 名 称: 说明书 颜 色: 黑白印刷 客 户: CH045 页 数: 13张A4纸 料 号: 8458-435900X006-051 备注: 成品尺寸: A5(148.5x210mm) 材 质: 80g铜版纸 材质符合欧盟包装指令（94/62/EC） 高度 > 高度 > 高度 > 高度 >...
- Page 2 2000W Electric Chain MCSWP2000S-2 EAN: 3663602627463 WARNING: Read the instructions before using the product!
-
Page 3: Table Of Contents
MCSWP2000S-2 Let’s get started... These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting started... Safety information Your product Before you start more detail... Product functions Operation Care and maintenance... -
Page 4: Safety Information
Safety information MCSWP2000S-2 Safety warnings General power tool safety warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool”... - Page 5 Safety information MCSWP2000S-2 increase the risk of electric shock. 4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
- Page 6 Safety information MCSWP2000S-2 balance at all times. This enables better control of the power tool in unexpected situations. 6. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
- Page 7 Safety information MCSWP2000S-2 6. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. 7. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
- Page 8 Safety information MCSWP2000S-2 flying debris or accidental contact with the saw chain. 5. Do not operate a chain saw in a tree. Operation of a chain saw while up in a tree may result in personal injury. 6. Always keep proper footing and operate the chain saw only when standing on fixed, secure and level surface.
- Page 9 Safety information MCSWP2000S-2 Causes and operator prevention of kickback: Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a sudden reverse reaction, kicking the guide bar up and back towards the operator.
- Page 10 Safety information MCSWP2000S-2 Additional safety warnings 1. The product should be supplied via a residual current device (RCD) with a tripping current of not more than 30 mA. 2. Position the cord so that it will not be caught on branches and the like, during cutting.
- Page 11 Safety information MCSWP2000S-2 and these instructions. 2. Ensure that the product is in good condition and well maintained. 3. Use correct cutting attachments for the product and ensure they are in good condition. 4. Keep tight grip on the handles/grip surface.
- Page 12 Safety information MCSWP2000S-2 hidden objects during use. 3. Danger of injury and property damage caused by flying objects. 4. Injuries and damage to property to due to thrown and fallen objects. 5. Prolonged use of this product expose the operator to vibrations and may produce ‘whitefinger’...
- Page 13 Safety information MCSWP2000S-2 Symbol explanation On the product, the rating label and within these instructions you will find among others the following symbols and abbreviations. Familiarize yourself with them to reduce hazards like personal injuries and damage to property. Volt, (alternating voltage)
- Page 14 Safety information MCSWP2000S-2 Symbol explanation Wear protective gloves. Wear protective, slip-resistant footwear. Wear safety helmet! Wear face protection! Switch the product off and disconnect it from the power supply before assembly, cleaning, adjustments, maintenance, storage and transportation. Remove plug from the mains immediately if the cable is damaged or cut.
- Page 15 WEEE symbol. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. MCSWP2000S-2: M-Mac Allister,CS-Chain Saw,WP-With Power,...
-
Page 16: Your Product
Your product MCSWP2000S-2 Your product 7 8 6 1. Front handle 13. Power cord with plug 2. Front guard/chain brake 14. Oil tank cap 3. Saw chain 15. Lock-off button 4. Guide bar 16. Cable strain relief 5. Sprocket wheel 17. -
Page 17: Before You Start
Before you start MCSWP2000S-2 Unpacking 1. Unpack all parts and lay them on a flat, stable surface. 2. Remove all packing materials and shipping devices, if applicable. 3. Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage do not use the product but contact your dealer. - Page 18 Before you start MCSWP2000S-2 Assemble the guide bar and saw chain before operation. Chain and guide bar Use only the guide bar (4) and saw chain (3) according to the technical data of the product. WARNING! Always use a saw chain designed as “low- kickback”...
- Page 19 Before you start MCSWP2000S-2 5. Ensure the tension disc (23) is adjusted to inner right position, turn anticlockwise if required (Figs. 3, 4). Fig. 3 Fig. 4 6. Align the guide bar (4) and saw chain (3) assembly with the drive sprocket (22) and support pin(21).
- Page 20 Before you start MCSWP2000S-2 9. After saw chain tensioning, turn the locking wheel (7) clockwise to tighten the cover (9) completely (Fig. 7, b). Saw chain tensioning Always check the saw chain tension before use, after first cuts and regularly during use, approx. every five cuts. After initial operation, new chains can lengthen considerably.
- Page 21 Before you start MCSWP2000S-2 4. Check the chain tension using one hand to lift the saw chain (3) against the weight of the product. The correct chain tension is achieved when the saw chain can be lifted by approx. 2 - 4 mm from the guide bar (4) in the centre (Fig.
- Page 22 Before you start MCSWP2000S-2 1. Set the product on any suitable surface with the oil tank cap (14) facing upwards. 2. Unscrew and remove the oil tank cap (14), then add the lubricant into the tank. We recommend using environmentally-friendly chain oil specifically intended to be used with this product.
- Page 23 Before you start MCSWP2000S-2 Checking NOTE: Perform the following test before operating your product. This product is equipped with an automatic oiling system. The oiling system automatically delivers the proper amount of oil to the bar and chain. Checking the lubrication requires starting the product. Before checking, the product must be fully assembled and all instructions must have been read.
- Page 24 Before you start MCSWP2000S-2 For UK only 1. Make sure the on/off switch (18) is in its off position. 2. Correct the power plug to a suitable power source. 3. Now your product is ready for use. Not for UK 1.
- Page 25 MCSWP2000S-2...
-
Page 26: In More Detail
MCSWP2000S-2 more detail... Product functions Operation Care and maintenance Trouble shooting Recycling and disposal Guarantee Technical specifications EC declaration of conformity... -
Page 27: Product Functions
Product functions MCSWP2000S-2 Intended use This electric chain saw MCSWP2000S-2 is designated with a rated input of 2000 Watts. The product is intended for cutting logs with a thickness of max.320 mm. It must not be used for cutting other materials, such as plastic, stone, metal or wood that contains foreign objects. - Page 28 Product functions MCSWP2000S-2 Chain brake The chain brake is a safety mechanism activated by the front guard (2). When kickback occurs the chain stops immediately. Fig. 16 Fig. 17 The chain brake (2) in the The chain brake (2) in the...
- Page 29 Product functions MCSWP2000S-2 4. Press the lock-off button (15) with your right thumb, then fully squeeze in the on/off switch (17) with your index finger and hold it in position. 5. While the motor is running, activate the chain brake (2) by moving your left hand forward against the chain brake.
-
Page 30: Operation
Operation MCSWP2000S-2 General operation 1. Check the product, its power cord and plug as well as accessories for damage before each use. Do not use the product if it is damaged or shows wear. 2. Double check that the accessories and attachments are properly fixed. - Page 31 Operation MCSWP2000S-2 5. The saw chain (3) must be running at full speed before it makes contact with the wood. Use the spike bumper (6) to secure the product onto the wood before starting to cut and use it as a leverage point while cutting (Fig.
- Page 32 Operation MCSWP2000S-2 Kickback may occur if the nose or tip of the guide bar touches an object, or if wood pinches the saw chain in the cut. In some cases, contact with the tip of the guide bar (4) may cause a lightning-fast reverse reaction, kicking the guide bar up and back toward the operator (Figs.
- Page 33 Operation MCSWP2000S-2 • Always use a low kickback chain. • Apply the metal gripping teeth for leverage. • Ensure correct chain tension. Felling a Tree 1. When bucking and felling operations are being performed by two or more persons at the same time, the felling operations should be separated from the bucking operation by a distance of at least twice the height of the tree being felled.
- Page 34 Operation MCSWP2000S-2 Felling back cut 1. Make the felling back cut (Fig. 29, A) at least 50 mm higher than the horizontal notching cut (Fig. 29). Keep the felling back cut parallel to the horizontal notching cut. Make the felling back cut so enough wood is left to act as a hinge.
- Page 35 Operation MCSWP2000S-2 Cutting spring poles A spring pole is any log, branch, rooted stump, or sapling which is bent under tension by other wood so that it springs back if the wood holding it is cut or removed (Fig. 31).
- Page 36 Operation MCSWP2000S-2 3. When the log is supported on both ends (Fig. 34), cut 1/3 the diameter from the top (overbuck). Then make the finished cut by underbucking the lower 2/3 to meet the first cut. 4. When bucking on a slope Fig.34...
-
Page 37: Care And Maintenance
Care and maintenance MCSWP2000S-2 The golden rules for care WARNING! Always switch the product off, disconnect the product from the power supply and let the product cool down before performing inspection, maintenance and cleaning work! Keep the product clean. Remove debris from it after each use and before storage. - Page 38 Care and maintenance MCSWP2000S-2 Maintenance Before and after each use, check the product and accessories (or attachments) for wear and damage. If required, exchange them for new ones as described in this instruction manual. Observe the technical requirements. Sprocket wheel NOTE: It is not necessary to remove the saw chain (3) to lubricate the sprocket wheel(5).
- Page 39 Care and maintenance MCSWP2000S-2 1. Disassemble the guide bar and saw chain in reversed order from assembly. 2. Check the oiling port (20) for clogging and clean if necessary to ensure proper lubrication of the guide bar and saw chain during operation.
- Page 40 Care and maintenance MCSWP2000S-2 Fig. 42 Fig. 43 7. Check the saw chain for possible wear and damages. Replace it with a new one if required. Experienced users can sharpen a dull saw chain (see section “Saw chain sharpening”). 8. Refit the saw chain (3) and the guide bar (4) as described under “Assembly”.
- Page 41 Care and maintenance MCSWP2000S-2 3. To sharpen the chain proceed as follows: - Use protective gloves. - Ensure the chain is correctly tensioned. - Engage the chain brake to lock the chain on the bar. 4. Use a chain file, whose diameter is 1.1 times the cutting tooth depth.
- Page 42 Care and maintenance MCSWP2000S-2 Spare parts The following parts of this product may be replaced by the consumer. Spare parts are available at an authorised dealer or through our customer service. Description Model no. or Specification Saw chain OREGON 91P056X...
- Page 43 Care and maintenance MCSWP2000S-2 Only fit an approved 13 Amp BS 1363 or BS 1363/A plug and the correctly rated fuse. If in doubt, consult a qualified electrician. NOTE: If a moulded plug is fitted and has to be removed take great care in disposing of the plug and severed cable, it must be destroyed to prevent engaging into a socket.
-
Page 44: Troubleshooting
Troubleshooting MCSWP2000S-2 Troubleshooting Suspected malfunctions are often due to causes that the users can fix themselves. Therefore check the product using this section. In most cases the problem can be solved quickly. WARNING! Only perform the steps described within these... -
Page 45: Recycling And Disposal
Recycling and disposal MCSWP2000S-2 Recycling and disposal Waste electrical products should not be disposed of withhousehold waste. Please recycle where facilities exist. Check with your Local Authority or local store for recyclingadvice. -
Page 46: Guarantee
Guarantee MCSWP2000S-2 Guarantee > This product carries a guarantee of 24 months starting from the day of purchase. Please retain your receipt as a proof. > This guarantee specifically excludes losses due to: - Normal wear and tear, including accessory wear... -
Page 47: Technical Specifications
Technical specifications MCSWP2000S-2 Technical specifications General 220 –240 V~ ,50 Hz > Rated voltage, frequency > Rated power input 2000 W 8238 min > Rated no load speed n > Protection class approx. 6.4 kg > Weight > Cutting length: 320 mm 400 mm (16”) - Page 48 Technical specifications MCSWP2000S-2 WARNING! Depending on the actual use of the product the vibration values can differ from the declared total. Adopt proper measures to protect yourself against vibration exposures. Take the whole work process including times the product is running under no load or switched off into consideration.
-
Page 49: Ec Declaration Of Conformity
MCSWP2000S-2 EC declaration of conformity (UK) DECLARATION OF CONFORMITY Product • Chainsaw 2000W • MCSWP2000S-2 • Serial number range 000001 to 999999 Name and address of the manufacturer or his authorised representative: Kingfisher International Products Limited 3 Sheldon Square London W2 6PX United Kingdom This declaration of conformity is issued under the sole responsibility of the manufacturer. - Page 50 Product/ Produit/ Produkt/Produsul/Producto/Produto • Chainsaw 2000W/ Tronçonneuse 2000W/ Pilarka łańcuchowa 2000W/ Motoferăstrău 2000W/ Motosierra 2000W/ Motosserra 2000W • MCSWP2000S-2 • Serial number range 000001 to 999999 Name and address of the manufacturer or his authorised representative: Nom et adresse du fabricant ou de son mandataire: Nazwa i adres producenta lub jego upoważnionego przedstawiciela:...
- Page 51 EC declaration of conformity MCSWP2000S-2 2006/42/EC as amended Machinery Directive 2014/30/EU as amended Directive Electromagnetic compatibility 2000/14/EC as amended Outdoor Noise Directive 2011/65/EU as amended Directive Restriction of the use of certain hazardous substances in electrical and electronic equipment Directive 2006/42/CE relative aux machines 2014/30 / UE telle que modifiée Directive Compatibilité...
- Page 52 EC declaration of conformity MCSWP2000S-2 Authorised signatory and technical file holder/signataire et responsable de la documentation technique authorisé/ podmiot uprawniony do wystawienia i adres prezechowywania dokumentacji technicznej/semnatar autorizat și deținător al dosarului tehnic/firmante autorizado y titular del expediente tecnico/ signatário autorizado e detentor da ficha técnica...
- Page 53 Manufacturer,Fabricant,Producent,Producător,Fabricante: UK Manufacturer: Kingfisher International Products Limited 3 Sheldon Square, London, W2 6PX United Kingdom www.kingfisher.com/products EU Manufacturer: Kingfisher International Products B.V. Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands www.kingfisher.com/products www.diy.com To view instruction manuals online, visit www.kingfisher. www.screwfix.com com/products www.screwfix.ie www.castorama.fr Pour consulter les manuels d’instructions en ligne,...