GE PROFILE SMART MIXER WITH AUTO SENSE Quick Start Manual page 4

Getting Started
4 When the bowl and attachment are in place, raise the bowl arms by slowly pushing up on arms until
they lock into place. Slide the bowl shield onto the bowl if desired.
5 Plug the mixer into an outlet.
Pull down on the quick change to
7
release your attachment.
Attachment
output shaft
NOTE:
Bowl support in locked position
6 Use the speed dial and turn to your desired
speed. When finished, turn back to the
mixing OFF position.
Image shows
the control
knob in the
mixing OFF
position
49-9000048 Rev. 1 12-22 GEA