Thank you for showing your confidence in us by purchasing the Behringer PEDAL BOARD PB1000/PB600. This high-quality lightweight pedal board is able to transport
up to 12 (PB1000) or up to 6 (PB600) pedals.
The onboard 1.7 A power supply includes all necessary cabling for powering your collection of stompboxes.
Connections
(4)
(5)
(6)
(3)
(1) Use this ¼" TS INPUT connector to plug in the instrument cable. Please use only a high-quality instrument cable here.
(2) The ¼" TS TO EFFECTS connector sends the signal to your effects pedals.
(3) Use these ¼" TS FROM EFFECTS connectors to plug in the stereo effects signal from your effects pedals.
(4) These ¼" TS OUTPUT TO AMP connectors send the signal to your amp(s).
(5) Use the 9 V connection to plug in the included 9 V power supply.
(6) Use the DC OUT connector to plug in the included daisy chain cable and connect it to all effects pedals.