24-hour Tech Support Line: (715)808-0164
RE926X-03-00 Flexible Bus WiFi Communicator
Features
Connects panels to local WiFi Network
•
Compatible with:
•
Honeywell Vista® 15P and 20P
o
DSC PowerSeries®
o
CADDX NX
o
UTC Concord 4
o
Enables:
•
Alarm Reporting
o
Interactive Control Functions
o
Ethernet data reliability
o
Z-Wave Communicator included
o
Key Instructions
The same unit works for Vista, Power Series, CADDX NX, & UTC Concord 4.
•
Selectable switch determines panel compatibility.
•
DO NOT MOUNT INSIDE METAL CAN – there are radios on the boards that
•
need to be in free-air to communicate.
Communicator must be connected to a 12V nominal power supply with
•
battery backup, such as the control panel's aux power output.
RE926X communicates with the Vista 15P/20P via AUI device 2.
•
Enable AUI 2 in the Vista.
Wiring Instructions
NOTE:
Some programming must be done PRIOR to connection
Maximum cable lengths shown in the table below, this assumes the communicator is
the only device attached to the cable. If multiple devices share the same cable, the
maximum cable length must be derated accordingly.
Wire Size (AWG)
Maximum cable length to Control Panel
18
600
22
250
24
150
RE926X-03-00_Flexible Bus WiFi CommunicatorPage 1 of 10
24-hour Tech Support: (715)808-0164
www.ResolutionProducts.com
Honeywell
Vista 20P or 15P
DATA OUT
7
DATA IN
6
AUX +
5
AUX -
4
RE926X-03-00_Flexible Bus WiFi CommunicatorPage 2 of 10
2-Nov-15
RE926X
WiFi
Module
PowerSeries
A/Rx
Yellow
CLK
B/Tx
Green
DATA
GND
+12V
AUX - BLK
Red
Black
AUX + RED
24-hour Tech Support: (715)808-0164
www.ResolutionProducts.com
RE926X
DSC
WiFi
Module
A/Rx
YEL
Yellow
CLK
B/Tx
Green
GRN
DATA
GND
Black
+12V
Red
2-Nov-15