Advertisement
Quick Links
RE929S Interlogix
LTE Communicator
interactive services and home automation to the Simon
panel.
Features
• Connects Simon panels to the LTE cellular network
• Provides interactive services without panel replacement
• 5 year warranty
Installation
1. Set up an account with your
interactive services provider.
2. Install the communicator into
the Simon panel using the steps
below:
• Disarm and then power
down the Simon panel.
• Plug the communicator
into the back of the
Simon panel.
• Place the antenna into
the slot at the top of the
Simon panel.
• Power up the Simon
panel.
• Installation is complete.
Operation
Events are reported to both the monitoring receiver and the interactive server. All events
use Contact ID reporting codes.
Events reported by default
• Alarm
• Alarm Cancel
• Opening
• Closing
• System Low Battery
• System Low Battery Restoral
• AC Power Fail
• AC Power Restoral
Interactive control and viewing of the system can be done through the interactive
services platform.
Verify proper installation and operation using your Simon panel's installation manual.
®
Simon
®
Compatible LTE Communicator
is an LTE cellular device that provides
Communicator
I
Antenna
Advertisement
Related Manuals for Resolution Interlogix Simon RE929S
Summary of Contents for Resolution Interlogix Simon RE929S
- Page 1 RE929S Interlogix ® Simon ® Compatible LTE Communicator LTE Communicator is an LTE cellular device that provides interactive services and home automation to the Simon panel. Features • Connects Simon panels to the LTE cellular network • Provides interactive services without panel replacement •...
-
Page 2: Led Indication
Operation Cellular LED Indicators The factory default button will reset the communicator if held for approximately 5 seconds, and will factory default the communicator if held for approximately 10 seconds. • All LEDs will flash off once when the communicator is reset, and will flash again when it is factory defaulted. -
Page 3: Troubleshooting
Troubleshooting Cellular communication problems can be solved in many ways: • Make sure antennas are securely snapped into the circuit board • Reposition the unit (move or rotate) • Move the unit higher in the building • Move the unit away from metal objects (appliances, ducts) •... -
Page 4: Specifications
Resolution Products, Inc. products will function with United Technologies Electronics Controls, Inc. systems. However, no FCC NOTICE Resolution product is produced by, endorsed by, or is officially associated with United Technologies Electronic Controls, Inc. This device complies with Part 15 of the FCC rules. Operation is...