Redback A 1717A Operating Manual page 4

Redback® A 1717A Message Player
6.0 INSTALLING MP3 FILES
You will first need to remove power from the A 1717A then remove the Micro SD card from the front of the unit.
To remove the Micro SD card push the card in and it will eject itself.
In order to access the program, the Micro SD card will need to be connected to a PC. You will need a PC or laptop equipped
with an Micro SD card reader to do this. If an SD slot is not available then the Altronics D 0371A USB Memory Card Reader
or similar would be suitable (not supplied).
Step by step guide to install an MP3 into Trigger1 with a Windows installed PC
Step 1: Make sure the PC is on and card reader connected and correctly installed. Then insert the Micro SD card into the
reader.
Step 2: Go to "My Computer" or "This PC" and open the Micro SD card which is usually marked "Removable disk".
In this case it is named "Removable disk (J:) as shown in figure 3.
Step 3: Open the Removable Disk and you should get a window that looks like figure 4.
The contents of the Micro SD card include a Library folder of sample MP3 files and four folders for the trigger MP3 files.
These four folders correspond to the triggers on the rear of the A 1717A.
4 Redback® Proudly Made In Australia
Fig 3
Fig 4
www.redbackaudio.com.au