1. Manuals
  2. Brands
  3. Redback Manuals
  4. Turntable
  5. A 1717A
  6. Operating manual

Redback A 1717A Operating Manual

Message player
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Redback® A 1717A Message Player
Operating Manual
A 1717A Message Player
Distributed by Altronic Distributors Pty. Ltd.
Phone: 1300 780 999 Fax: 1300 790 999 Internet: www.altronics.com.au
IMPORTANT NOTE:
Please read these instructions carefully from front to back prior to installation.
They include important setup instructions.
Failure to follow these instructions may prevent the unit from working as designed.
User manual revision number: 1.0 13/08/2021
www.redbackaudio.com.au
Redback® Proudly Made In Australia
1

Advertisement

Table of Contents
loading

Related Manuals for Redback A 1717A

Summary of Contents for Redback A 1717A

  • Page 1 Redback® A 1717A Message Player Operating Manual A 1717A Message Player Distributed by Altronic Distributors Pty. Ltd. Phone: 1300 780 999 Fax: 1300 790 999 Internet: www.altronics.com.au IMPORTANT NOTE: Please read these instructions carefully from front to back prior to installation.

  • Page 2: Installation

    Momentary: In Momentary mode (DIP1 switch1 ON) (see Fig 3) a momentary closing contact or pulse on the trigger pins will activate the MP3. The A 1717A will continue to play the MP3 till it finishes and will stop playing and wait for another trigger activation.

  • Page 3: Front Panel Connections

    The switched output terminal is triggered when any message or tone is activated. The output voltage is the same as the power supplied to the unit. ie if the A 1717A is powered by 24V DC, the switched output voltage will be 24V DC.
  • Page 4 6.0 INSTALLING MP3 FILES You will first need to remove power from the A 1717A then remove the Micro SD card from the front of the unit. To remove the Micro SD card push the card in and it will eject itself.
  • Page 5 Redback® A 1717A Message Player Step 4: Open the Trig1 folder and you should see an MP3 file which could be named Trigger1.MP3 as shown in figure 5. Fig 5 This MP3 file needs to be deleted and replaced by the MP3 file you want to play when you activate trigger1. The MP3 file name is not important.

  • Page 6: Dip Switch Settings

    Momentary: In Momentary mode (DIP switch1 ON) a momentary closing contact or pulse on the trigger pins will activate the MP3. The A 1717A will continue to play the MP3 till it finishes and will stop playing and wait for another trigger activation.

  • Page 7: Firmware Update

    6) With the power turned OFF, insert the Micro SD card back into the A 1717A. 7) Turn the A 1717A ON. The unit will check the Micro SD card and if an update is required the A 1717A will perform the update automatically.
  • Page 8 100% developed, designed & assembled in Australia. Since 1976 we have been manufacturing Redback amplifiers in Perth, Western Australia. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support.

Table of Contents