Table of Contents
Advertisement
Available languages
Available languages
Instructions for use
Blending Tips and Tricks
•
Cut food into pieces no larger
than 3⁄4" for use in the blender.
•
When preparing foods that
have several different kinds of
ingredients, always add liquid
ingredients first.
•
When ingredients splatter onto
the sides of the jar or the mixture
is very thick, press Stop ( ) to turn
appliance off. Remove the lid and
use a rubber spatula to scrape
down the sides of the jar and to
redistribute the food, pushing
food toward the blades. Replace
the lid and continue blending.
•
When making bread crumbs make
sure blender jar is completely dry.
•
When using PULSE function; use
short bursts. Allow the blades to
stop rotating between pulses. Do
not use PULSE for more than 2
minutes.
Use PULSE when preparing
•
beverages that include ice cubes
or anything frozen; this helps to
produce a smoother texture.
•
It is helpful to begin the blending
process on the lowest speed and
then increase to a higher speed,
if necessary.
•
To stop blending at any time, press
Stop (
).
•
Do not store foods in the blending
jar.
•
Do not overfill the blender (the
blender is more efficient with less
rather than more).
•
Do not run blender for longer
than 1 1⁄2 minutes at a time. Scrape
down sides of blending jar, if
necessary, and continue blending.
•
Do not use if blending jar is
chipped or cracked.
•
It is not recommended to use your
blender to beat egg whites, mix
dough, mash potatoes, or grind
meats.
DO NOT PLACE ANY OF THE
FOLLOWING IN THE BLENDER:
•
Large pieces of frozen foods
•
Tough foods such as raw turnips,
sweet potatoes and potatoes
•
Bones
•
Hard salami, pepperoni
•
Boiling liquids (cool for 5 minutes
before placing in blending jar)
ERROR MESSAGES
Error 1: The touch screen flashes
on and off constantly. Indicates
a large air bubble in an overly
dry mixture. Touch anywhere on
screen to dismiss. Add liquid and/
or stir mixture.
Error 2: The touch screen flashes
in a repeating sequence of two
quick flashes then a longer flash.
It indicates that the motor is
overheated. Unplug and let the
blender cool down 20 minutes
to reset.
27
PowerXL
Smart Pro
™
Advertisement
Chapters
Table of Contents
