Rohrman Schweißtechnik Autodim XA-1001 F Instruction Manual

Instruction Manual
Autodim automatic welding helmets
General information
The Autodim automatic welding helmets are protective safety products
of recent generation. Modern and well developed technologies as there
are LCD, opto-electronic capture, solar cells and microelectronic
technology are integrated in the filter of the helmets. The filter in the
helmets protect the eyes effectively against injuries by the radiation of
the arc. The automatic control of the darkening and brightning of the
filter enables the weldor to keep both hands free for precise work. The
use of the automatic welding helmet substancially increases produc-
tivity and quality of the welding results. The autodim automatic welding
helmets may be applicated diversively in the welding process and with
disc splitting. The Autodim automatic welding helmets of the types XA-
1010, XA-1011 and XA-5001 are suitable for grinding.
Features
The autodim automatic welding helmets are furnished with a filter
which reacts and darks automatically by the ignition of the arc. The
power supply of the filter takes place by solar cells. No battery change
is necessary. Before ignition of the arc the filter is transparent, so that
the weldor has a clear view on the workpiece. The photosensors react
on the radiadion of the arc within 0,0001 sec. and dark the view to the
adjusted darking stage (9–13). The filter brightens after deleting the
arc adjustable within 0,1–0,9 millisec. (Delay). The Autodim protective
welding helmets protect the weldor in bright- and dark stage for UV-/IR
radiation (DIN 13). The filter is protected by an external window disc
against pollution and weldspatter.
Please, read this manual carefully before using the helmet.
F ilte r d im e nsion
V ie win g ran g e
Brig htn e ss le ve l
Ad ju stme nt o f
D a rk le ve l
R e sp o n se t ime
D e la y
Wo rk ing t e m pe ratu re
Po we r sup p ly
UV-/IR pro te ctio n
We ig ht
Autodim XA-1001 F Autodim XA-1010 Pro
100 x 90 x 8,5 mm 110 x 90 x 8,5 mm
4,33" x 3,54" x 0,33 4,33" x 3,54" x 0,33"
96 x 42mm 97 x 47 mm
3,78" x 1,65" 3,82" x 1,85"
4
9 – 13
External
0,1 ms (CE) 0,1 ms (CE)
0,05 ms (ANSI) 0,05 ms (ANSI)
adjustable adjustable
0,1 – 0.9 ms 0,1 – 0.9 ms
Internal
-10 °C bis +55 °C -10 °C bis +55 °C
+14 °F bis +131 °F +14 °F bis +131 °F
Solar cell
Litium-Battery Litium-Battery
permanent permanent
DIN 13
500 g
Warnings
The Autodim helmets are constructed for the protection of the eyes and
for the face against arc- and heat radiation, welding spatters and
sparks under regular circumstances.
Protective clothing and welders gloves must be worn according
regulations. Avoid work positions which expose parts of your body to
sparks, spatters and heat radiation or adapt your protective cloth
accordingly.
The helmet gives no protection against heavy mechanic blows,
explosives or against caustic liquids! The helmet is not eligible for laser
welding and -cutting or for overhead welding.
The Autodim welding helmet XA-1001 F is not suitable for grinding.
Please, verify the darking range before any use and inspect the
protection windows on purity and prove the sensors so they are not
covered with dirt.
Inspect all parts of the helmet on wear and damage before use. All
worn parts must be exchanged immediately. Do not dip the helmet or
the filter in water. Do not rinse the filter or other parts with solvents.
The permitted working temperature of the filter is –5°C to +55°C. Do
not use the helmet beyond this temperature range.
Do not modify the helmet, filter or other parts. Use original spare parts!
With the use of unauthorized changes or unlicensed spare parts, the
warranty expires and there is danger for the user of the helmet
Autodim XA-1011 Pro
110 x 90 x 8,5 mm
4,33" x 3,54" x 0,33"
97 x 47 mm
3,82" x 1,85"
4 4
9 – 13 9 – 13
External External
0,1 ms (CE)
0,05 ms (ANSI)
adjustable
0,1 – 0.9 ms
Internal Internal
-10 °C bis +55 °C
+14 °F bis +131 °F
Solar cell Solar cell
Litium-Battery
permanent
DIN 13 DIN 13
550 g 550 g
Autodim XA-5001 Pro
114 x 133 x 9 mm
4,49" x 5,24" x 0,35"
100 X 60 mm
3,94" x 2,36"
4
9 – 13
Internal
0,1 ms (CE)
0,05 ms (ANSI)
adjustable
0,1 – 0.9 ms
Internal
-10 °C bis +55 °C
+14 °F bis +131 °F
Solar cell
Litium-Battery
Battery exchangeable
permanent
DIN 13
550 g