Disassembly And Reassembly Of Ot-565; Esd Safety; Disassembly Tools; Process - TCT Mobile B10C/OT-565 Repair Document

B10C/OT-565(A) Repair Document

7. DISASSEMBLY and REASSEMBLY of OT-565

7.1 ESD Safety

7.2 Disassembly tools

You may use the following tools during the disassembly and reassembly procedure:
Plastic Wedge
Soldering iron
Hook
Please make reference to APPENDIX 1 and find out the pictures of the tools.

7.3 Process

The steps of disassembly OT-565 are as below.
This module should only be disassembled from bottom to top.
Step 1:
Take off the battery cover, battery and SIM card if there is.
Step 2:
Take off the 6 screws from the furnished frame, take off the commercial label 7 from the battery house,
position as the below picture showed
1
6
ED 1.0
All right reserved. Passing on and copying of this document, use and communication are not permitted
without authorization
Please wear static loop or static glove
Screw driver
Hot wind gun
Knife
3
2
7
5
B10C Level 2 Repair Document
Tweezers
Soldering Jig
4
11/26