M-Sure MS-535 Series Quick Start Manual

M-SURE Digital Depth Gauges
Precautions
• Before using the Digital Depth Gauge for the first time, wipe with a clean cloth ideally soaked with cleaning oil.
• Digital Depth Gauges are precision measuring instruments. Avoid using excessive force, and treat with care.
• The fitted battery is intended for the factory test procedure and therefore may not meet the specified battery life.
• Avoid exposure to all liquids, excessive humidity or temperature.
• Avoid exposure to bright sunlight.
• Never apply voltage on any part of this Depth Gauge or electric engrave.
• Remove the battery if the Gauge is not being used for a long period of time.
• Never use solvents to clean. Only use a soft cloth with cleaning oil.
Digital Depth Gauge
Depth Gauge with hook
9
Thickness:
2mm
Standard Depth Gauge
Depth Measurement
Battery Replacement
1
1. Insert the key into the battery cover.
2. Twist to unlock. DO NOT use
excessive force.
7
6
6. Insert the replacement battery with
its edge against the side battery contact.
7. Press down on the opposite edge.
www.m-sure.co.uk - Allendale Group Ltd, Pindar Road, Hoddesdon, Hertfordshire. EN11 0BZ.
Images & Content ©2020 Allendale Group Limited. E&OE - Specifi cations subject to change without prior notice.
1
Add hook thickness to
the displayed value
2
3. Lift out the battery cover.
8. Locate the two lugs on the battery
cover with the two slots on the Depth
Gauge. Insert the battery cover.
10. Instrument Base Reference Plane.
Part No: MS-535, 540 & 542 Series
1. Base
4
3
2. Reading head
2
3. Locking screw
5
4. LCD display
5. Data port
8
7
3
4. Remove the battery.
be used)
5. Locate the side spring battery contact.
8
9. Twist to lock. DO NOT use excessive
force.
Doc V: 1.0
6. Beam
7. Battery cover
8. Function buttons
9. Hook
6
Add hook thickness to
the displayed value
4
5
(A magnet tip tool can
9
10