Table of Contents
Advertisement
8.1.3.
Test Link Mode for Base Unit
Note:
(*1) LCD displays the Channel number.
(*2) LCD displays the number of selected power.
(*3) Refer to Test Link Mode for Handset (P.61). If can not proceed to the next step, refer to Registering a Handset (P.70).
(*4) Refer to Check Table for RF part (P.72) and Test Burst Mode for Handset (P.59) for proper Handset settings.
(*5) Display may vary according to the receiving sensitivity.
57
KX-TG6700B/KX-TG6702B/KX-TGA670B
Advertisement
Table of Contents
Troubleshooting
