AEG LWR8585M5UD User Manual page 33

Table of Contents

Advertisement

4. After about 10 seconds,
(Access Point) appears on the
display.
The access point will be open for about 3
minutes.
5. Configure the My AEG Care app on
your smart device and follow the
instructions to connect the appliance
to your Wi-Fi network.
6. If the connectivity is configured, when
the programme information screen
returns, the indicator
display.
Every time you switch the
appliance on, the appliance
takes about 10 seconds to
connect to the network
automatically. When the
indicator
the connection is ready.
To switch the wireless connection off,
press and hold the Finish In and the Auto
Dry buttons simultaneously for a few
seconds until the first acoustic signal.
Release the buttons.
the display for 5 seconds.
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless credentials,
press and hold the Finish In and the Auto
Dry buttons simultaneously for a few
seconds until the second acoustic signal:
is on the
stops blinking
appears on
appears on the display for a few
seconds.
11.4
Remote Start
The Remote Start enables you to start a
cycle in remote control.
The Remote Control
activates automatically when
you press the Start / Pause
button to start the
programme, but it is also
possible to start a washing
programme remotely. This
function is deactivated when
door is open.
When the App is installed and the
wireless connection is complete, you can
activate the Remote Start:
1. Touch the Remote Start
and the indicator
display for a few seconds.
2. Touch the Start / Pause
activate the Remote Start before the
indicator
stops blinking.
The indicators
and
programme summary screen and the
door is locked. Now it is possible to start
the programme remotely.
When touching the Start /
Pause
button after the
indicator
blinking, the Remote Start is
not activated, but the set
programme starts.
To remove the Remote Start, tap on the
Remote Start
button and confirm by
pressing the Start / Pause
ENGLISH
33
button
blinks on the
button to
appear on the
stops
button.

Advertisement

Table of Contents
loading

Table of Contents