Child Lock; Cancelling The Programme - Sharp ES-NFA7141WD-EN User Manual

9. No Spin(*)
Auxiliary function button 3 No Spin
If you don't want to perform wringing on
your laundry, you can use this auxiliary
function. You may make the programme
active by pressing the wringing cancel
button on the display panel when the led
light of the symbol turns on.
10. Cold Wash(*)
Auxiliary function button 3 Cold Wash
You can use this auxiliary function when
you want to wash your laundry with cold
water (tap water). You may make the
programme active by pressing the cold
washing button on the display panel when
the led light of the
(*)Machinery specifications may vary
depending on the product purchased.
Start/Pause button
By pressing on the Start/Pause button,
you may start the programme you
have selected or suspend a running
programme. If you switch your machine to
the standby mode, the Start/Pause led on
the electronic display will blink.
symbol turns on.
EN - 18

5.8 Child Lock

The Child Lock function allows you to
lock the buttons so that the wash cycle
you have chosen cannot be changed
unintentionally.
To activate child lock, press and hold
button 2 and 3 simultaneously for at
least 3 seconds. ''CL'' will flash on the
electronic display for 2 seconds when the
child lock is activated.
If any button is pressed or selected
programme is changed by the programme
dial while the child lock is active, the "CL"
symbol will flash on the electronic display
for 2 seconds.
If the child lock function is active and
a programme is running, when the
programme dial is turned to the CANCEL
position and another programme
is selected the previously selected
programme continues from where it was
left.
To deactivate the child lock, press and
hold button 2 and 3 simultaneously for at
least 3 seconds until the "CL" symbol on
the electronic display disappears.

5.9 Cancelling the Programme

To cancel a running programme at any
time:
1. Turn the programme dial to the
"STOP" position.
2. Your machine will stop the washing
operation and the programme will be
cancelled.
3. Turn the programme dial to any other
programme to drain the machine.
4. Your machine will perform the
necessary draining operation and
cancel the programme.
5. You can now select and run a new
programme.