Child Lock; Cancelling The Programme; Programme End - Sharp ES-HFA6123WD-EE User Manual

NOTE: If you put less than half
the maximum load of laundry into your
machine, the half-load function will be
automatically set, regardless of the
programme you selected. This means
that the selected programme will take less
time to complete and will use less water
and energy. When your machine detects
half load, the symbol is displayed
automatically.
(*) Model Dependant
10. Start/Pause Button
Washing
Rinsing
Spinning
End
To start the selected programme, press the
Programme Start/Pause button.
If you switch your machine to standby
mode, the Start/Pause indicator on the
electronic display will blink.

5.8 Child Lock

The child lock function prevents the
machine being operated unintentionally or
by unsupervised children.
To activate the child lock, press and hold
additional functions 3 and 4 simultaneously
for at least 3 seconds. The Additional
Function LEDs will be lit on the control
panel when the child lock is activated.
If any button is pressed while the child lock
is active, the Additional Function LEDs on
the control panel will blink.
If the child lock is engaged and any
Start-Pause
EN - 17
programme is running, when the
programme dial is turned to the CANCEL
position and another programme selected,
the previously selected programme
continues from where it was left.
To deactivate the child lock, press and hold
additional functions 3 and 4 simultaneously
for at least 3 seconds. The Additional
Function LEDs will will blink on the display.

5.9 Cancelling the Programme

To cancel a running programme at any
time:
1. Turn the programme dial to the "STOP"
position.
2. Your machine will stop the washing
operation and the programme will be
cancelled.
3. Turn the programme dial to any other
programme to drain the machine.
4. Your machine will perform the
necessary discharge operation and
cancel the programme.
You can now select and run a new
programme.

5.10 Programme End

Your machine will stop by itself as soon as
the programme you have selected finishes.
• "END" will flash on the display panel
• You can open the machine's door and
remove the laundry.
• Leave the door of your machine open
to allow the inner part of your machine
to dry.
• Switch the programme dial to STOP
position.
• Unplug your machine.
• Turn the water tap off.