1. Manuals
  2. Brands
  3. Pasdole Manuals
  4. Nail Gun
  5. CF150-PP
  6. Operating manual

Pasdole CF150-PP Operating Manual

Cordless 1-1/2" positive placement nailer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IMPORTANT!
DO NOT DESTROY
It is the customer's responsibility to have
all operators and service personnel read
and understand this manual.
Printed in U.S.A.
© 2023 Illinois Tool Works Inc.
906207-2
04/23
CORDLESS 1-1/2"
POSITIVE PLACEMENT
OPERATING MANUAL
Part No. 906200
Model CF150-PP
NAILER
®
ww w.paslode.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CF150-PP and is the answer not in the manual?

Questions and answers

Related Manuals for Pasdole CF150-PP

Summary of Contents for Pasdole CF150-PP

  • Page 1 Part No. 906200 Model CF150-PP CORDLESS 1-1/2" IMPORTANT! POSITIVE PLACEMENT NAILER ® DO NOT DESTROY It is the customer's responsibility to have all operators and service personnel read and understand this manual. OPERATING MANUAL Printed in U.S.A. © 2023 Illinois Tool Works Inc.

  • Page 2: Table Of Contents

    Contents Subject Page Introduction and Warranty ............................... 3 An Overview of the Paslode Cordless 1-1/2" Positive Placement ® Nailer............... 4 Safety Instructions ................................6 Battery and Charger ................................ 9 Fuel Cartridge ................................11 Preparing the Paslode Cordless 1-1/2" Positive Placement ®...

  • Page 3: Introduction And Warranty

    Introduction and Warranty Paslode Cordless 1-1/2" This Cordless Nailer should be handled like other power fastening tools that you use. Like most tools, when Positive Placement Nailer ® used improperly injury could result. If you are going to Operating Manual allow others to use this Cordless Nailer, it is your responsibility to make sure that they also read and comply This manual is intended to acquaint you with the Paslode...

  • Page 4: An Overview Of The Paslode Cordless 1-1/2" Positive Placement Nailer

    Overview of the Paslode Cordless 1-1/2" Positive Placement Nailer ® Description Specifications The Paslode Cordless 1-1/2" Positive Placement Nailer ® Dimensions: Weight- 6.7 lbs with battery is a self-contained, fully portable nailer that uses liquid hydrocarbon fuel to power a unique linear drive internal Height 13.6 inches combustion motor.
  • Page 5 Overview of the Paslode Cordless 1-1/2" Positive Placement Nailer ® DEPTH OF DRIVE ADJUSTMENT FUEL CELL LOADING NAIL HOLE LOCATION PROBE FLASHING GREEN = CHARGED FLASHING RED = NEEDS CHARGING STAND/REST ERGONOMIC RUBBER HAND-GRIP BYPASS FOLLOWER BELT HOOK ADJUSTABLE RAFTER HOOK...

  • Page 6: Safety Instructions

    Safety Instructions The following safety instructions have been included in this booklet to provide you with basic information necessary for WARNING safe operation of the Paslode Cordless Framing Nailer. DO NOT ATTEMPT TO OPERATE THIS TOOL UNTIL YOU HAVE READ AND UNDERSTAND ALL SAFETY Never expose or store the PRECAUTIONS AND MANUAL INSTRUCTIONS.
  • Page 7 Safety Instructions 8. ALWAYS POINT THE TOOL AWAY FROM YOURSELF AND OTHERS WHEN CLEARING JAMS OR WARNING REMOVING FASTENERS. REMOVE THE FUEL CARTRIDGE AND BATTERY. EYE and EAR safety gear Pull the follower slightly back and push the release must be worn when lever.
  • Page 8 Safety Instructions 18. KEEP YOUR HANDS CLEAR OF THE WORK AREA 13. ALWAYS MAINTAIN SECURE AND UNOBSTRUCTED SURFACE. FOOTING WHEN ON LADDERS, PLATFORMS OR OTHER HIGH LOCATIONS. WARNING WARNING A fastener may exit at an Never over-reach, since angle unexpectedly and tool recoil may cause a cause injury.

  • Page 9: Battery And Charger

    Battery and Charging System Important Charging Notes Charging Instructions The Paslode Cordless 1-1/2" Positive Placement ® Remove the charger unit from the tool case and plug Nailer comes with a rechargeable battery and its own it into a 120V AC outlet. Set the charger base on a charging system.
  • Page 10 Battery and Charging System Battery Indicator Light On the right side of the handle is a small plastic lens. This is the battery indicator light. When you insert a fully-charged battery into the tool, you will see a blinking green light. If the indicator light blinks red, recharge the battery.

  • Page 11: Fuel Cartridge

    Fuel Cartridge Fuel Cartridge There is a second container inside the Paslode Framing Fuel Cell. between the container and the outer cylinder is filled with a gas, called the propellant, which is under pressure. DANGER To eject the fuel, propellant pressure squeezes the inner E X P L O S I O N / F I R E fuel container much as you squeeze a tube of toothpaste.
  • Page 12 Fuel Cartridge NOTE: Paslode Cordless fuel cartridges are marked with a “Best Use Before” date on the bottom of the can. For maximum performance use fuel before the “Best Use Before” date. DANGER Paslode Cordless Fuel Cartridges are flammable. Do not remove fuel cartridge cap or install on other fuel cartridges! Paslode Cordless Fuel Cell/Cartridge Disposal Guidelines Paslode the industry leader in cordless technology provides this information to assist users with the proper disposal of discarded...
  • Page 13 Fuel Cartridge CORRECT FUEL CELL LOADING PROCEDURE To open - Push forward, lift Open fuel door assembly Remove fuel cell carefully then back Raise fuel tube block assembly, Load fuel cell Carefully align fuel adaptor and it will lock in up position cell stem To close - Push forward, then down to lock fuel door...

  • Page 14: Preparing The Paslode Cordless 1-1/2" Positive Placement

    Preparing the Paslode Cordless 1-1/2" Positive Placement Nailer for Use ® Fasteners The Paslode Cordless 1-1/2" Positive Placement ® Nailer Use only Paslode 1-1/2" drives Paslode 1-1/2" Positive Placement Nails. ® Positive Placement Nails ® designed to be used with the tool. The use of fasteners that do not meet Paslode standards could cause tool damage and will void all warranty claims.

  • Page 15: Paslode Cordless 1-1/2" Positive Placement ® Nailer Operation

    Paslode Cordless 1-1/2" Positive Placement Nailer Operation ® Cold Weather Operation: (Continued) It will be necessary to repeat this procedure several times until the temperature of the tool warms up enough DANGER to operate in it’s normal mode. The Nail Hole Location Probe and nose will become Once the tool reaches operational temperature the tool hot after prolonged or rapid use.

  • Page 16: Servicing

    Servicing Restrict Field Service to the Following Fuel Cartridge Check If the Cordless Nailer’s fan operates and the indicator CHECKING THE ENERGY LEVEL OF THE BATTERY light is green, but the tool will not cycle or does not drive fasteners completely, check the fuel cartridge. With the RECHARGING THE BATTERY fuel cartridge out of the tool, check to see if the cartridge still contains fuel and that the metering valve is working.
  • Page 17 Servicing CLEARING A FASTENER JAM Remove Battery, Fuel Remove 2 cap Remove nut from rear Cell and Nails screws on side of of magazine. magazine securing magazine to the nose Remove the magazine Push or punch the With driver blade Reassemble tool, assembly to expose driver blade back to...

  • Page 18: Troubleshooting

    Troubleshooting Preparing Tool for Operation - Battery/Charger Problems SYMPTOM POSSIBLE PROBLEMS SERVICE Battery does not appear to accept charge Inoperative indicator lights on charger, or Try battery in tool after a full charge cycle. when battery is plugged into the charger. defective charger.
  • Page 19 Troubleshooting Normal Stage of Operation SYMPTOM POSSIBLE PROBLEMS SERVICE Nail Hole Locating Probe requires adjustment. Adjust the Probe. Tool operates properly, but fasteners do not drive fully. Fuel cell is low. Check fuel cell and replace as required. There may be loss of seal in combustion Press Nail Hole Locating Probe against chamber.
  • Page 20 Schematics Part No. 906200 Model CF150-PP PARTS LEGEND PARTS LEGEND PASLODE IM40 POSITIVE PLACEMENT NAILER B60001 919042 1 Grill 919161 1 Fuel Door Assembly - All Weather 900455 1 Filter 919116 2 Screw SHC 8-32 x 3/8 × 901065 4 Screw SHC 10-24 x 1-1/4...
  • Page 21 Schematics (cont.) Part No. 906200 Model CF150-PP • SERVICE KIT 010031 Torque Values (in/lb) Item Torque Item Torque 55-60 35-40 30-35 30-35 20-25 30-35 15-20 43 155-165 • 8-10 • • •  • • • 1  21 ...
  • Page 22 Schematics (cont.) Part No. 906200 Model CF150-PP   Block not in kit 57  Torque Values (in/lb) Item Torque Item Torque 30-35 35-40 35-40 18-22 18-22 18-22  55-65 25-30 All parts sold as single items unless described as a pack, set or •...

This manual is also suitable for:

906200

Table of Contents