Status:questionable:condition; Status:questionable:enable <Mask - Agilent Technologies E2290A User's Manual And Programming Manual

STATus:QUEStionable:CONDition?

Note
Parameters
Comments
STATus:QUEStionable:ENABle <mask>
Note
Parameters
Comments
Always returns a 0.
The Questionable Status Condition, Event, and Enable registers exist for SCPI
compliance only. No status bits are defined or reported in these registers.
None
•
No bits are defined.
•
*RST clears all Status Questionable Conditions.
•
*CLS does not affect the contents of the Status Questionable Conditions.
•
The STAT:PRESet command does not affect the Status Questionable
Conditions.
Sets the value of the QUEStionable Status Enable Register.
The Questionable Status Condition, Event, and Enable registers exist for SCPI
compliance only. No status bits are defined or reported in these registers.
None
•
No bits are defined.
•
*RST and *CLS do not affect the value of the enable mask.
•
The STAT:PRESet command sets the value of the enable mask to 0.
SCPI Command Reference 43