Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Canoga Perkins EdgeAccess UCS 1202 CIM
- Page 1 Model 1202 Chassis Interconnect Module User Manual...
- Page 2 Canoga Perkins and any unauthorized use or disclosure of such drawings, specifications and information is prohibited. Canoga Perkins reserves the right to change or update the contents of this manual and to change the specifications of its products at any time without prior notification. Every effort has been made to keep the information in this document current and accurate as of the date of publication or revision.
-
Page 3: Table Of Contents
EdgeAccess Universal Chassis System Table of Contents Chapter 1 Introduction....................1-1 Overview ..........................1-1 External Features........................1-1 Chapter 2 Installing the CIM..................2-1 Install a CIM...........................2-1 Connect the Cables.........................2-1 Front Panel Controls.......................2-2 2.3.1 LEDs............................2-2 2.3.2 Alarm Acknowledgment Pushbutton ..................2-3 Clock Source for Linked CIMs ....................2-3 Power Up the Chassis......................2-3 Chapter 3 Management - VT-100................3-1 The CIM Management Screen....................3-1... - Page 4 EdgeAccess Universal Chassis System Model 1202 CIM User Manual...
-
Page 5: Chapter 1 Introduction
EdgeAccess Universal Chassis System Chapter 1 Introduction Overview The Chassis Interconnect Module (CIM), used in a Universal Chassis System (UCS) 1002 chassis, links up to eight chassis in a domain to provide management and alarm status. This domain can include both UCS 1000 and 1002. Link the chassis in a cascade through the Chassis Link Up and Down ports on the front panel. -
Page 6: Figure 2. Cim Front Panel
EdgeAccess Universal Chassis System Figure 2. CIM Front Panel Model 1202 CIM User Manual... -
Page 7: Chapter 2 Installing The Cim
EdgeAccess Universal Chassis System Chapter 2 Installing the CIM The CIM is installed in the UCS 1002 chassis in slot 0 at the factory. Occasionally, you may need to install a CIM in a UCS 1002, if ordered separately. Install a CIM To install the CIM, follow these steps: 1. -
Page 8: Front Panel Controls
EdgeAccess Universal Chassis System All modules in the chassis supply their alarm status to the alarm relay contacts on the CIM. You can connect an external device to the terminal to provide alarm information to a person or an environment away from the chassis. 6. -
Page 9: 2.3.2 Alarm Acknowledgment Pushbutton
EdgeAccess Universal Chassis System 2.3.2 Alarm Acknowledgment Pushbutton The Alarm Acknowledgement (ALM ACK) reset pushbutton on the front panel resets the latch for the alarm relay, which can reset the external device connected to the alarm relay terminal block. ALM ACK does not reset or correct the alarm condition and the LED(s) will remain on until the problem is resolved. - Page 10 EdgeAccess Universal Chassis System Model 1202 CIM User Manual...
-
Page 11: Chapter 3 Management - Vt-100
EdgeAccess Universal Chassis System Chapter 3 Management - VT-100 To connect to and manage the CIM, use either the serial or Ethernet port on an optional DMM and an application such as HyperTerminal. For details about accessing the DMM and using the management software, see the User Manual for the 1500 or 1502 Domain Management Module for your system. -
Page 12: Using Alarm Information
EdgeAccess Universal Chassis System Field Definition Backplane Alarm Inputs Shows fault conditions in a module in this chassis or in a linked CIM CIM Major Alarms Shows detected Major or Minor alarm conditions CIM Minor Alarms Up Link Installed Shows connections to other CIMs Down Link Installed CIM Model Lists configuration data... -
Page 13: Chapter 4 Cim Specifications
EdgeAccess Universal Chassis System Chapter 4 CIM Specifications Physical Specifications Dimensions 3.0"H x 1.0"W x 9.0"D (76.2mm x 25.4mm x 228.6mm) Weight 0.3 lb (0.1 kg) Environment 0° to 50° C Up to 95% Humidity (noncondensing) Power +5.15 VDC, 400 mA maximum Regulatory Compliance •... -
Page 14: Appendix A Warranty Information
EdgeAccess Universal Chassis System Appendix A Warranty Information Current Warranty information is available on-line in the Client Login Area of the Canoga Perkins web site (www.canoga.com) or by contacting Technical Support at 800-360-6642 (voice) or fiber@canoga.com (email). Model 1202 CIM User Manual... -
Page 15: Appendix B Glossary
EdgeAccess Universal Chassis System Appendix B Glossary These definitions apply to the 1202 CIM. ALM ACK Alarm Acknowledgement Chassis Interconnect Module Clock Common Domain Management Module Major Minor Normally Open Normally Closed Return Material Authorization Status Terminal Block (connector) Universal Chassis System Model 1202 CIM User Manual... - Page 16 CANOGA PERKINS CORPORATION 20600 Prairie Street Chatsworth, California 91311-6008 USA Phone: (818) 718-6300 FAX: (818) 718-6312 Web Site: www.canoga.com Email: fiber@canoga.com...