Related Manuals for Electric Eel eCAM Ace
Summary of Contents for Electric Eel eCAM Ace
- Page 1 Ace Color Video Inspection System OPERATOR’S MANUAL For Safe and Effective Operation: Before operation of your system, it is advised that this manual be read carefully.
-
Page 2: Table Of Contents
CONTENTS PAGE 3 LIMITED WARRANTY PAGE 4 LIMITATION OF WARRANTY / SERVICE / FREIGHT PAGE 5 NON-WARRANTY CHARGES PRODUCT FEATURES PAGE 6 USER INSTRUCTIONS PAGE 7/8 INSPECTION PROCEDURE PAGE 9-11 FEATURE IDENTIFICATION PAGE 12 TROUBLESHOOTING PAGE 13 MAINTENANCE PAGE 14 USA REPAIR FACILITIES PAGE 15 CANADA REPAIR FACILITIES... -
Page 3: Limited Warranty
Electric Eel's responsibility under this Limited Warranty is limited to the repair, adjustment or replacement of defective parts as determined by Elec- tric Eel in its sole discretion. Electric Eel shall not be held liable for any damages, including but not limited to direct, indirect, special, or conse- quential damages arising out of, resulting from, or in any way connected to the use of Electric Eel products. - Page 4 Elec- tric Eel products. You also agree that the application and use of a Electric Eel product is be- yond our control and is the sole responsibility of the user. By receiving and using one of Electric Eel’s products, you hereby acknowledge and agree...
- Page 5 PRODUCT FEATURES With the eCam Ace reel you can complete pipe inspections without the use of a traditional monitor and with the ease of a system that runs on external 18V Milwaukee compati- ble batteries (not included) or the 12V AC/DC adapter.
-
Page 6: User Instructions
4-6 hours in a single charge. Batteries are sold separately. Locating Sonde With the eCam Ace the 512hz locating sonde is always on. Use any brand of 512hz locator to find the sonde when un- derground. Sondes are locatable up to 15ft. underground dependent upon thickness of concrete and presence of steel/ cast iron pipe. -
Page 7: Inspection Procedure
INSPECTION PROCEDURE Skids or sleeves should ALWAYS be used to protect the camera head. Depending on the size of the pipe you are in- specting, you may need to use a skid so the camera is cen- tered or off the floor of the line. Care should be taken so the skids do not snag in the line. - Page 8 Upon completion of the inspection and retrieval of the camera, it may be necessary to ‘manipulate’ the camera around the initial bend (clean out) in the pipe with a pole or other device if required. NEVER use the camera to unclog a drain or clear de- bris in the pipe.
-
Page 9: Feature Identification
FEATURE IDENTIFICATION Sunshade and Screen Protector 6” Wheels 18V Battery Cradle and AC/ DC Adapter Power Input... - Page 10 RCA Video Screen 5.4” LCD Out Jack Screen ON/OFF LED Lights Sapphire Camera Lens Plastic Skid/Sleeve...
- Page 11 LOCATING THE 512 Hz SONDE Insert the sonde in the drain and locate it while it is still just in view at the drain or duct entrance. Hold the locator vertical directly over the sonde with the antenna in line with the sonde.
-
Page 12: Troubleshooting
TROUBLESHOOTING CONTACT YOUR LOCAL REPAIR CENTER ON PAGE 14/15 OF THIS DOCUMENT... -
Page 13: Maintenance
MAINTENANCE Inspection Camera - After every use, the camera should be cleaned and checked for possible damage. External scuffing of the camera case is normal and should be of no concern. The camera view port is made of sapphire and should be cleaned with a soft, damp cloth. - Page 14 REPAIR FACILITIES - USA Repairs, warranty or otherwise, returned to must be submitted with a “Return Maintenance Authorization.” For “RMAs” please contact: Hathorn USA Address: 739 North Wilson Road, Columbus, OH, 43204 Phone: 1-855-863-9226 FAX: 1-905-604-3400 Email: usaservice@hathorncorp.com Website: www.hathorncorp.com Kaiser Premier USA –...
- Page 15 REPAIR FACILITIES - CANADA Repairs, warranty or otherwise, returned must be submitted with a “Return Maintenance Authorization.” For “RMAs” please contact: Hathorn Canada - Ontario, Manitoba & Eastern Canada Address: 255 Shields Court, Unit C, Markham, ON L3R 8V2 Phone: 1-905-604-7040 FAX: 1-905-604-3400 Email: service@hathorncorp.com Website: www.hathorncorp.com Access Spec Telecommunications - Quebec...
- Page 16 Electric Eel Manufacturing Co. Inc 501 West Leffel Lane Springfield, Ohio 45506 1-800-833-1212...
Need help?
Do you have a question about the eCAM Ace and is the answer not in the manual?
Questions and answers