Download Print this page

Hausmann 1560-65-036 Installation & Operation Instructions page 3

Convertible staircase

Advertisement

9. Attach the straight handrails 'E' over the Base 'A' on the inside part of the uprights such that Barrel bolts on the
handrails are facing inwards using Pan Head/Philips screw 'R' with Flat washer 'U' as shown in Figures 8 & 7. At this
point loosely fit the handrail on the uprights.
NOTE:
Each Handrail is produced with either a "hook" or a "cup" that are designed to "lock" into each other when
assembled. They also have an inner and outer face, so it is important that they are installed in the correct location.
10. For the corner setup the corner is "locked" together with the "hook" & "cup" fitting as shown in Figure 7 and for the
straight setup the remaining handrails can only be setup one way for correct assembly.
11. Insert the Barrel bolts in each of the medium handrails 'F' the same way it was inserted in straight handrails.
12. Attach the Medium handrails 'F' on the inside part of the 'J' & 'L' uprights so that Barrel bolts 'S' on the handrails
should be facing inwards using Pan Head/Philips screw 'R' with Flat washer 'U' as shown in Figures 9.
NOTE:
Fit the 'hook' or 'cup' into the handrail next to it. Once all the handrails are installed, tighten all screws and bolts to
secure the structure.
J
Figure 9: Medium Handrail 'F'
13. Attach the Long Handrails 'G' on the inside part of the 'I', 'K' & 'M' uprights so that Barrel bolts 'S' on the handrails
should be facing inwards using Pan Head/Philips screw 'R' with Flat washer 'U' as shown in Figures 10.
NOTE:
Fit the 'hook' or 'cup' into the handrail next to it. Once all the handrails are installed, tighten all screws and bolts to
secure the structure.
CAUTION: PREVENTATIVE MAINTENANCE REQUIRED
1. Inspect hex bolts and other mechanical fasteners periodically. Tighten bolts, screws or connections if loose (Tighten until
snug, but do not overtighten). Failure to do so may result in serious injury.
2. Do not use if any loose fasteners are found.
3. Discontinue use of any product that is NOT in proper working order until situation is rectified. Failure to do so may result in
serious injury.
Rev. 102413 aj
S
F
L
Page 3 of 3
S
G
M
Figure 10: Long Handrail 'G'
I
K
©2013 HAUSMANN INDUSTRIES, INC.

Advertisement

loading