Advertisement
Fitting Instructions - Read instructions carefully before fitting and follow them for correct use
IN8184
Bulkhead - VG305S / VG305P
ME0964
X1
ME0965
(TOP)
(BOTTOM)
FX4061
X2
FX4090
(M6X14)
(No8 x 1/2")
CAUTION - IMPORTANT NOTES
1. You should note that it is the responsibility of the installer/s to ensure that when drilling holes in to your
vehicle to take fixings, care must be taken to ensure that the fuel line, tyres, fuel tank, wiring loom, exhaust,
bodywork and brake lines etc. are not damaged. Whilst every effort has been made to ensure our products can
be safely fitted, changes to vehicles sometimes occur so it's always necessary to check before drilling.
If in doubt refer to the vehicle manufacturer's dealership.
2. When drilling, use as short a drill bit as possible to prevent damage to the vehicle. Use corrosion protection
when drilling the vehicle.
3. Wear the appropriate protective equipment (safety glasses & gloves) while fitting this product.
4. Regularly inspect all fixings and parts. Any damaged or worn parts should be immediately removed the
vehicle and replaced.
5. Retain instructions for future use. It is important that the end user receives this document.
This FITTING INSTRUCTION is the property of VAN GUARD ACCESSORIES LTD. and must not be used for
manufacturing purposes, copied nor communicated in any way to third parties without written
permission from VAN GUARD ACCESSORIES LTD.
IN8184_B
X1
ME0966
X2
(FIXING BRACKET)
X17
FX4016
X7
FX4017
(M6)
(M6)
TOOLS REQUIRED
SPANNER (10MM) X2
PH SCREW DRIVER X1
DRILL (Ø3.2MM) X1
X4
FX4020
X5
(M8)
!
Van Guard Accessories Ltd
Fair Oak Close, Exeter Airport Business Park,
Exeter, Devon, EX5 2UL
www.van-guard.co.uk
FX4042
X5
(M6X16)
IN8184 - PAGE 1 OF 3
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vanguard VG305S
Summary of Contents for Vanguard VG305S
- Page 1 Fitting Instructions - Read instructions carefully before fitting and follow them for correct use IN8184 Bulkhead - VG305S / VG305P ME0964 ME0965 ME0966 FX4016 FX4017 FX4020 FX4042 (TOP) (BOTTOM) (FIXING BRACKET) (M6) (M6) (M8) (M6X16) FX4061 FX4090 (M6X14) (No8 x 1/2”)
- Page 2 Please read the important notes on page 1 before fitting this product. Carefully drill 3.2mm through the fixing positions shown below and secure to the floor of the vehicle using No8x1/2” self-tap screws (FX4090). Position the bottom bulkhead into the vehicle against the ‘C’ pillar with the bottom return looking into the load area.
- Page 3 Once happy with the position of the bulkhead carefully drill 3.2mm through the Carefully drill 3.2mm through the side fixing positions shown below and secure to positions shown below and secure using No8x1/2” self-tap screws (FX4090). the vehicle using No8x1/2” self-tap screws (FX4090). LOOKING AT BULKHEAD FROM LOOKING AT BULKHEAD FROM LOAD SIDE...
Need help?
Do you have a question about the VG305S and is the answer not in the manual?
Questions and answers