Advertisement
1) Input Toshiba Pattern (#16) to Video Input.
2) Select 04. Option-1 → 10. Video Port.
3) Set 10. Video Port equal to Video.
4) At Main SVC Menu, select 01. Picture Improvement → 01. White Balance.
5) Adjust Items 01 → 08 as performed in DVI mode.
6) Return to Main SVC menu and select 04. Option-1 → 10. Video Port.
7) Set 10. Video Port equal to Graphic.
8) At Main SVC Menu, select 01. Picture Improvement → 01. White Balance.
9) Adjust Items 01 → 08 as performed in DVI Mode.
※ Thus, Micom saves the W/B data separately for each memory mode of the block (See the block diagram given below) during
W/B adjustment.
RF
V-PEAKING
VIDEO
RGB/YUV
CONTRAST
BRIGHT
YPbPr
DTV
CXA2151
COMP1,2
PC
(A-RGB)
DVI
SIL169
(D-RGB)
Samsung Electronics
VSP9437
FLI2310
Y-Delay
C-Delay
Brightness
Scaler
Contrast
Saturation
AD9883
Adjustment
Reg
Y/R-gain
Cr/B-gain
Cb/G-gain
Y/R-offset
SW
RGB
Cr/b-offset
IC
Cb/G-offset
Memory
Mode
Analog PC
RGB
- Auto Color
value(RGB)
DTV Mode
ASI510
DNIe
Video
Port
Adjustment
Reg
RGB-cont
Bri-offset
RGB-bri
S/W
Con-offset
R-gamma
G-gamma
B-gamma
Memory
Mode
- DVI
- PC
- Video
Graphic
- Component(DTV)
Port
Different adjustment values will be applied
to DVI, PC ,DTV(Component) and Video mode.
Alignment and Adjustments
Logic
Adjustment
Reg
R-dri
G-dri
B-dri
R-cutoff
G-cutoff
B-cutoff
Memory
Mode
- DVI
- PC
- Video
- Component(DTV)
2-3
Advertisement
