2. Alignment and Adjustments
2-1 Service Mode
2-1-1 SERVICE MODE Entry Method (General Transmitter)
■ Using the Customer Remote
1. Turn the power off and set to stand-by mode.
2. Press the remote bottons in this order; POWER OFF-MUTE-1-8-2- POWER ON to turn the set on.
3. The set turns on and enters service mode.
※ If you fail to enter service mode, repeat steps 1 and 2 above.
2-1-2 Initial SERVICE MODE DISPLAY State
2-1-2(A) OSD DISPLAY
Factory Mode
01. Picture Improvement
02. Initial Setting
03. PIP/TTX/Test Pattern
04. Option-1
05. Option-2
06. Reset
Release : Aug 5 2004 09:14:45
Version : T-NPL42NUS-1001
2-1-2(B) Button Operations in SERVICE MODE
Menu
UP/DOWN
LEFT/RIGHT
(ENTER)
SOURCE button
While in Tuner mode, the direct access buttons can be used to select and change channels.
♣
♣
Samsung Electronics
Current Input Mode
▶
▶
▶
▶
▶
▶
Displays all menus
Cursor moves to select items
To increase and decrease the data of the selected items
Confirm your choice(Store OR Enter)
Change input source
☞ Indicates selected input mode
☞ Picture Adjustment
☞ Setting the Initial Values
☞ Setting the Special Features
☞ Options-1 : Particular Product Options
☞ Options-2 : PDP Properties Options
☞ Initializing after saving the adjustments
☞ Software Version Information
Alignment and Adjustments
2-1