Greasing - JVC HR-V506EL Service Manual

MAINTENANCE/INSPECTION PROCEDURE

5-2) Greasing

(1) Greasing guidelines
Apply grease, with a cleaning patch. Do not use excess
grease. It may come into contact with the tape transport
or drive system. Wipe excessive grease and clean with
cleaning patch wetted in Isopropyl Alcohol.
NOTE:Greasing Points
1) Loading Path Inside & Top side
2) Base Assembly P2, P3 stopper
3) Shaft
4) L/D Motor Gear Wheel Part
2
1
7
6
Chassis (Top)
Gear Part
Gear Sector
Base Loading
Chassis (Left Side)
4-21
5) Arm Take-up Rubbing Sections
6)Reel S,T shaft(G381:Yellow)
7) Arm Assembly F/L Rotating
Sections
4
3
5
7
Gear Cam
Gear Drive
Guide Rail
Chassis (Right Side)
(2) Periodic greasing
Grease specified locations every 5,000 hours.
1) Loading Path Inside & Top side
2) Base Assembly P2,P3 stopper
3) Shaft
4) Shaft
5) Clutch Assembly D35 Shaft
3
4
6
Slider Guide
5
Chassis (Bottom)
Gear Rack F/L
Plate Slider
6) Plate Slider Guide Sections
7) Plate Slider Guide Sections
8) Gear Assembly P2, P2 Rubbing
Sections
2
1
8
7
Slider Guide