Page 1
DTEx Marine Series DT500 DT800 DT900 Quick Start User Guide Designed in the United Kingdom...
Page 2
DO NOT DISASSEMBLE OR MODIFY THE BATTERY IN ANY WAY! To remove an accessory, unscrew the Your Entel battery pack incorporates a safety circuit to avoid danger. If the safety locking screw of the accessory by hand circuit is damaged or bypassed, or the battery cells are damaged directly, they in an anticlockwise direction.
CONTROLS & INDICATORS NON DISPLAY DISPLAY - UHF MODEL DISPLAY - VHF MODEL Talk here Talk here Talk here On/Off/Volume control. LED indicator Navigation key - channel up/down Rotate clockwise to turn on and increase Red Steady - Transmitting Microphone volume.
Page 4
BA Mask Communication module for C-C550 DT500, DT800, DT900 Series *CHPD/DT9, CHPHS/DT9 and CHPHD/DT9 supplied with PTT-E/DT9 **CXR5/DT9 and CXR16/DT9 supplied with PTT-C/DT9 Specific conditions of use: The Entel ATEX transceivers should only be used with the specific, permitted accessories, as detailed above.
Page 5
To remove, unscrew the locking screw anti- away, you will transmit poor quality clockwise and pull the battery away from the speech. top of the radio (D). When the transmission is finished release the PTT button. www.entel.co.uk All Rights Reserved. Copyright Entel UK Ltd.
Page 6
Binan, Binan City, Laguna 4024, Philippines. Tel: +63 2 552 5091 Email: info@entel.ph This declaration of conformity is issued under the sole responsibility of Entel UK Limited. The full text of the UKCA declaration of conformity is available at the following internet address: www.entel.co.uk/UKCA...
Need help?
Do you have a question about the DTEx Marine Series and is the answer not in the manual?
Questions and answers