Table of Contents
Advertisement
RAISING OR LOWERING THE UTILITY
BLADE:
The manual lift arm for raising and lowering the utility
blade is located on the right hand side of the tractor. To
raise the blade, pull back on the lift arm. To lower the
blade, push the lift arm slowly towards the front.
ADJUSTING THE ANGLE OF THE UTILITY
BLADE:
The handle that allows to adjust the angle of the blade is
located on the left hand side of the tractor, close to the
steering wheel. To adjust the angle, turn the handle
counter-clockwise to unlock the latch. Push or pull the
handle to adjust the blade to the desired angle.
TRIP SPRING PROTECTION:
The blade was designed to topple forward when striking
solid objects. Once the blade clears the obstacle, it will
spring back to its normal operating position, therefore,
protecting the operator and tractor from any impacts that
might occur.
OPERATION
Read the tractor Owner's Manual carefully. Be
thoroughly familiar with the controls & proper
use of the attachment. Know how to stop the at-
tachment & disengage the controls quickly
TO
PREVENT
TRACTION WHEN USING AN ATTACHMENT:
-Rear counterweight of 100 lbs. minimum is
required to counterbalance the attachment's
weight.
-Tractor manufacturer approved tire chains are
required.
-Do not operate on a slope greater than 10°.
-When dismounting the attachment remove rear
counterweights.
16
WARNING
WARNING
INJURIES
AND
FOR
.
MORE
Advertisement
Table of Contents
