Battery Charging; Recharging - ION MVI User Manual

MVI Instrument User Manual V2.4
NOTE: The display will indicate LO BAT when batteries require charging. Please note the instrument does not operate
reliably when LO BAT is indicated.

Battery charging

Universal Battery Charger (A-26220)
The MVI incorporates a NiMH battery with a continuous duty cycle of greater
than >4.5 hours' operation. The full charge cycle for the battery is 16 hours.
NOTE: If the units are charged from a flat battery the unit should not be
charged for more than 16 hours continuously.
If the unit requires a top up charge then 2 – 8 hours charging should be
sufficient.

Recharging

Switch the instrument off. Connect the MVI battery charger to the instrument. Use only the MVI charger supplied with
the instrument. Use of an alternative charger may damage the instrument and will void the warranty. The green
charging LED lamp located immediately below the ON/OFF switch will light indicating the batteries are accepting
charge.
Pioneering Gas Sensing Technology. Page 12 of 19 ionscience.com