TP-Link VIGI C440 Quick Start Manual

Quick Start Guide
Network Camera Anchors & Screws
*Images may differ from actual products.
©2023 TP-Link 7106510128 REV1.0.0
1
Wall/Ceiling Mounting
Option 1: Cable through the wall/ceiling
1. Drill Holes
Stick the mounting template to the desired mounting place. Drill
3 screw holes and 1 cable hole according to the template.
2. Open the Camera Case
Align the notch of the camera body with any score on the camera
base, and use a screwdriver to gently pry open the camera case.
3. Secure the Camera
Route the cable through the wall/ceiling. Insert anchors into the holes,
use screws to affix the camera base, and attach the camera to it.
4. Adjust the Surveillance Angle
Adjust the surveillance angle as needed. Make sure the lens is
positioned above the IR LED for normal viewing.
Tilt: 0° to 85°
Rotate: 0° to 360°
Quick
Start
Guide
Mounting Template Quick Start Guide
Cable Hole
(For the cable through wall/ceiling)
Notch of
camera body
Pan: 0° to 360°
Appearance
Camera Base
1
2
Press for 5 seconds to reset the
camera to factory settings.
Micro SD Card Slot
Insert a micro SD card for local
storage. Initialize the SD card via
VIGI app before recording videos.
Built-in Microphone
4
White LED
5
IR LED Speaker
6 7
*The camera's standard power supply is 12V DC or PoE (802.3af/at). The power
source should comply with Power Source Class 2 ( PS2) or Limited Power
Source(LPS) of IEC 62368-1.
Option 2: Cable through the side outlet
1. Drill Holes
Stick the mounting template to the desired mounting place. Drill
3 screw holes according to the template.
2. Open the Camera Case
Align the notch of the camera body with any score on the camera
base, and use a screwdriver to gently pry open the camera case.
Notch of
the shell
3. Secure the Camera
Route the cable through the side outlet. Insert anchors into the holes,
use screws to affix the camera base, and attach the camera to it.
4. Adjust the Surveillance Angle
Adjust the surveillance angle as needed. Make sure the lens is
positioned above the IR LED for normal viewing.
Tilt: 0° to 85°
1
2
3
4
5
6
7
Power Supply Interface
9
(12V DC) *
Notch of
camera body
Side Outlet
Pan: 0° to 360°
Rotate: 0° to 360°
8
9