Changing The Basic Set- Tings; Programme Counter; Calling Up The Programme Counter; Cleaning And Servicing - Bosch WAN28282GB User Manual And Installation Instructiions

Table of Contents

Advertisement

15.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press Start / Reload and, at the
2.
same time, turn the programme
selector to position 2.
a The display shows the current
value.
Set the programme selector to the
3.
required position.
→ "Overview of the basic settings",
Page 32
To change the value, press Finish
4.
in.
To save the changes, switch off
5.
the appliance.
16 Programme counter
The program counter displays the
number of finished programmes.
16.1 Calling up the pro-
gramme counter
Set the programme to position 1.
1.
Press Start / Reload and set the
2.
programme to position 2 at the
same time.
Set the programme to position 5.
3.
Programme counter en
17 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
17.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
every operation with the door
open, and leave the detergent
drawer to dry.
Run the programme Drum Clean
without laundry and using washing
powder that contains bleach.
17.2 Cleaning the detergent
drawer
Pull out the detergent drawer.
1.
Press down on the insert and re-
2.
move the detergent drawer.
33

Advertisement

Table of Contents
loading

Table of Contents