Reversing Handles/Doors - LG LRDCS2603D Owner's Manual

us_main.book.book Page 17 Mo nday, March 2, 2020 3:48 PM

Reversing Handles/Doors

Door reversal must be done by an authorized installer
or service person. If it is not, the doors will not be
covered by the warranty.
• Tools Needed
- 3/32 in. Allen wrench
- 1/8 in. Allen wrench
- 1/4 in. Allen wrench
Reversing the Refrigerator Handle
1
Loosen the set screws
mm) Allen wrench, and remove the handle.
2
Loosen the mounting fasteners
connect to the refrigerator door and handle
using a 1/4 in. (6.35 mm) Allen wrench, and
remove the mounting fasteners.
3
Carefully rotate the deco
c
counterclockwise with your ngers until
they loosen and fall
removed, install the covers in the screw holes
d
on the opposite side.
with a 3/32 in. (2.5
that
rative screw covers
out. Once they're
4
Attach the mounting fasteners
opposite side of the door using a 1/4 in. (6.35
mm) Allen wrench.
5
Place the handle on the door by fitting the
handle footprints over the mounting
fasteners and tightening the set screws
with a 3/32 in. (2.5 mm) Allen wrench.
Reversing Doors
1
Remove the top hinge cover screws
flat-head screwdriver to release the tabs
inside the front of the cover at the bottom
Remove the cover.
2
Rotate the hinge lever
top hinge free of the hinge lever latch
CAUTION
• When lifting the hinge, be careful that the door
does not fall forward.
17
INSTALLATION
a
to the
. Use a
.
clockwise. Lift the
.