Table of Contents
Advertisement
3 Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environmentally compat-
ible and can be recycled.
Sort the individual components by type and dispose
▶
of them separately.
3.2 Saving energy
If you follow these instructions, your appliance will use
less power.
Only preheat the appliance if the recipe or the recom-
mended settings tell you to do so.
→ "How it works", Page 27
¡ Not preheating the appliance can reduce the en-
ergy used by up to 20%.
Use dark-coloured, black-coated or enamelled baking
tins.
¡ These types of baking tin absorb the heat particu-
larly well.
Open the appliance door as little as possible during
operation.
¡ This maintains the temperature in the cooking com-
partment and eliminates the need for the appliance
to reheat.
4 Familiarising yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
On certain models, specific details such as colour and
shape may differ from those pictured.
1
2
Environmental protection and saving energy en
When baking multiple dishes, do so in succession or
in parallel.
¡ The cooking compartment is heated after baking
the first dish. This reduces the baking time for the
second cake.
If the cooking time is relatively long, you can switch
the appliance off 10 minutes before the cooking time
ends.
¡ There will be enough residual heat to finish cooking
the dish.
Remove any accessories that are not being used from
the cooking compartment.
¡ Accessories that are not being used do not need to
be heated.
Allow frozen food to defrost before cooking.
¡ This saves the energy that would otherwise be re-
quired to defrost it.
Switch off the display in the basic settings.
→ "Basic settings", Page 14
¡ Energy is saved when the display is switched off.
Note:
The appliance requires:
¡ A maximum of 2 W in networked standby mode
¡ A maximum of 0.5 W in non-networked standby
mode with the display switched off
1
Display
The display shows the current adjustment val-
ues, options or notes.
Use the
and
buttons to navigate in the dis-
play.
→ "Display", Page 5
2
Buttons
You can use the buttons to set various func-
tions directly.
→ "Buttons", Page 6
4.2 Display
The display is divided into different areas.
Status bar
The status bar is at the top of the display.
You can carry out actions depending on the setting
step.
In addition to the text information, you can see the cur-
rent status of different functions using symbols.
Symbol
Meaning
Time, e.g.
Display of the current time-setting op-
"12min10s"
tions.
→ "Time-setting options", Page 11
Timer is activated.
→ "Setting the timer", Page 12
The childproof lock is activated.
→ "Childproof lock", Page 14
5
Advertisement
Table of Contents
