Table of Contents
Advertisement
Installation
a
b
Remove the test
Turn on the tap and
strip from the
let the water run for
packet.
about a minute.
After determining hardness level of the supply water:
1. Turn on the machine, press Time Delay and P+/P keys simultaneously. After the
countdown (3,2,1) is displayed keep the keys pressed for a while.
2. Press P+/P key to activate the (r..) position.
3. Using Time Delay key, adjust water hardness level according to the hardness of the supply
water. See "Water hardness level adjustment table" for correct setting.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
English Water
Level
Hardness °dE
0th Level
0-5
1st Level
6-9
2nd Level
10-15
3rd Level
16-19
4th Level
20-24
5th Level
25-62
Perform the same hardness level adjustment that you have set on the control panel also with
the regeneration adjustment switch. For example, if you have adjusted to "3rd level" in the
control panel, also set the regeneration adjustment switch to 3rd level.
Regeneration Adjustment Switch
14
/43 EN
c
1 min.
1 Second
Hold the test strip in
the water for about
a second.
German Water
French Water
Hardness °dH
Hardness °dF
0-4
0-8
5-7
9-13
8-12
14-22
13-15
23-27
16-19
28-34
20-50
35-90
0th Level
d
Remove the test
strip from the water
and shake it.
Water Hardness Level Indicator
Press the Time Delay key to switch the water hardness
level to position 1. (r1)
Press the Time Delay key to switch the water hardness
level to position 2. (r2)
Press the Time Delay key to switch the water hardness
level to position 3. (r3)
Press the Time Delay key to switch the water hardness
level to position 4. (r4)
Press the Time Delay key to switch the water hardness
level to position 5. (r5)
1st Level
2nd Level
1
1
2
e
f
1 Minute
Wait for 1 minute.
The test strip shows
you the hardness
level.
3rd Level
4th Level 5th Level
3
4
Dishwasher / User's Manual
5
Advertisement
Table of Contents
