Advertisement

Dishwasher
Instruction Manual
DFS28020X

Advertisement

Table of Contents
loading

Summary of Contents for Beko DFS28020X

  • Page 1 Dishwasher Instruction Manual DFS28020X...
  • Page 2 Please read this user manual first! Dear Customer, We hope that you get the best results from the product which has been manufactured in state-of-the-art plants and passed through a strict quality control procedure. Therefore, please read the entire user manual carefully before using the product and keep it as a reference for future use.
  • Page 3: Table Of Contents

    CONTENTS 1. Dishwasher 5. Operating the product Technical specifications Keys Preparing the machine 2. Important safety instructions 5 Programme selection General safety Auxiliary functions Intended use Programming the washing time Children’s safety Starting the programme 3. Installation Child (Key) Lock Cancelling the programme Appropriate installation location Salt indicator (...
  • Page 4: Dishwasher

    Dishwasher Overview 1. Upper dish basket with shelf 2. Guide rail for the upper dish basket 3. Salt container 4. Cutlery basket 5. Detergent dispenser 6. Door 7. Control panel 8. Filters 9. Lower sprayer arm 10. Lower basket 11. Upper sprayer arm 12.
  • Page 5: Technical Specifications

    Technical specifications This product complies with the following EU directives: Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2006/95/EC, 2004/108/EC, 93/68/EEC, IEC 60436, EN 50242 Power input 220-240 V, 50 Hz Total power consumption 1800-2100 W Heater power...
  • Page 6: Important Safety Instructions

    Important safety instructions This section contains safety draining hoses must be instructions that will help to securely fastened and get protected from risk of remain undamaged. personal injury or property Unplug the product when • damage Failure to follow not in use. these instructions shall void Never wash the product •...
  • Page 7: Intended Use

    baskets. Do not put This product should • other loads on the door; not be used by persons otherwise, the product with physical, sensory may tilt. or mental disorders Never leave the door or unlearned or • of the product open inexperienced people apart from loading and (including children)
  • Page 8: Installation

    Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your location product. To make the product ready · Place the product on a solid and for use, make sure that the electricity, flat floor that has sufficient load tap water supply and water drainage carrying capacity! The product systems are appropriate before...
  • Page 9: Connection To The Drain

    Connection to the drain sludge accumulation at the end of washing. Water discharge hose can directly be connected to the drain hole or Permitted water temperature: up sink’s drainage. The length of this to 25°C connection must be min. 50 cm and The dishwasher may not be max.
  • Page 10: Adjusting The Feet

    Adjusting the feet • Connection must comply with national regulations. If the door of the product cannot • Power cable plug must be within be closed properly or if the product easy reach after installation. swings when you push it slightly, Unplug the product after the then you need to adjust the feet washing programme is over.
  • Page 11: Disposing Of Packaging Material

    Disposing of packaging for recycling. Do not dispose of the waste product with normal domestic material and other wastes at the end of its Packaging materials are dangerous to service life. Take it to the collection children. Keep packaging materials in center for the recycling of electrical a safe place away from reach of the and electronic equipment.
  • Page 12: Prewashing

    Prewashing Tips for energy saving Following information will help you use the product in an ecological and energy-efficient manner. • Wipe away any coarse food remnants on the dishes before putting them in the product. • Operate the product after filling it completely.
  • Page 13: Adding Salt

    Adding salt Water softening system needs to be regenerated in order for the product operates with the same performance continuously. Dishwasher salt is used for this purpose. Use in your product only the special softening salts produced particularly for use in dishwashers.
  • Page 14: Detergent

    5. If you will not start a washing 1. Push the latch to right to open the programme immediately after detergent dispenser lid (A). adding the salt, run the machine empty in the shortest programme to dissolve and wash away the scattered salt in the machine.
  • Page 15: Tablet Detergents

    “click” will be heard when the lid is Information about suitable closed. places (detergent dispenser, basket etc.) in the dishwasher In programmes with prewash and to place the tablet can be found at high temperature, in which you amongst the usage instructions use tablet detergents, make sure on the packages of the tablet that the detergent dispenser lid is...
  • Page 16: Rinse Aid

    Rinse aid 4. Turn the rinse aid amount adjuster manually to a position The rinse aid used in dishwashers between 1 and 6 (4). If there are is a special combination used to stains on tableware items after increase drying efficiency and washing, level must be increased prevent water or limescale stains and if there is a blue trace after...
  • Page 17 as well. Some delicate glass types and crystals may become dull in time. We strongly recommend you to check if the tableware you are going to purchase is suitable for washing especially in the dishwasher. Placing the dishes into the dishwasher You can use your dishwasher in the optimum way with respect to energy...
  • Page 18 Suggestions for loading the Improper Loading Of Dishware dishwasher Lower basket Upper basket 17 EN...
  • Page 19: Silverware Basket

    Silverware basket Collapsable lower basket wires (2 pieces) (depends on the model) Silverware basket is designed to wash (depends on the model) your dishes such as fork, spoon and The two piece foldable wires located etc. in a cleaner manner. at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls,...
  • Page 20: Collapsable Lower Basket Wires (2 & 4 Pieces)

    Collapsable lower basket wires (2 & 4 pieces) (depends on the model) The foldable wires (A) located at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc. You can create larger spaces by folding each wire individually or all them at once.
  • Page 21: Adjusting The Height Of Loaded Upper Basket

    Adjusting the height of loaded upper basket (depends on the model) Basket adjustment mechanism on the upper basket of the machine is designed to allow you create wider areas in the upper or lover section of the machine based on your requirements by adjusting the height of the loaded basket in up or down directions without removing it from...
  • Page 22: Adjusting The Height Of Loaded Upper Basket

    Adjusting the height of loaded upper basket (depends on the model) Basket adjustment mechanism on the upper basket of the machine is designed to allow you create wider areas in the upper or lover section of the machine based on your requirements by adjusting the height of the loaded basket in up or down directions without removing it from...
  • Page 23: Adjusting The Height Of Empty Upper Basket

    Adjusting the height of empty upper basket (depends on the model) You can adjust the height of the upper basket according to the size of the dish to be washed. Use basket rollers to change the basket height. 1. Turn the stoppers on the ends of the upper basket rails by turning them aside (A).
  • Page 24: Operating The Product

    Operating the product 1. Display Half Load Function 2. On/Off key Fast+ Function 3. Start/Pause/Cancel key Super Rinse Function 4. Time Delay key AquaActive Function 5. Function keys 6. Program Selection keys 7. Programme indicator 13. Screen information line 8. Salt ( ) indicator 14.
  • Page 25: Keys

    Keys 3. Press Programme Selection keys until the number of the On / Off key programme you selected appears It is used to turn on or off the on the Programme indicator. machine. Use P+ to switch to the next Machine will turn on with economy programme, and P- to switch to programme in On mode and the...
  • Page 26 25 EN...
  • Page 27: Auxiliary Functions

    Auxiliary functions 2. Turn the machine on with On/Off key. Washing programmes of your dishwasher are designed to obtain 3. Select the desired programme and the best cleaning effect, considering press the Half Load key. The Half the type of the soil, soiling degree Load indicator will light on the and properties of the dishes to be display in the Function Selected...
  • Page 28: Programming The Washing Time

    To deactivate: Floor illumination is activated 1. After turning on the machine, automatically when the washing press Time Delay and P+ keys programme starts and remains lit simultaneously. Keep them until the end of the programme. pressed until the countdown 3, 2, Floor illumination cannot be 1 is completed on the display.
  • Page 29: Starting The Programme

    Changing the settings while Time indicated at the beginning due to Delay function is enabled this process. The total time can While the Time Delay function is also change while the programme is running depending on the activated, you cannot make changes in the washing programme, auxiliary ambient temperature where your functions or the duration of delay...
  • Page 30: Child (Key) Lock

    Child Lock does not lock the door Adjusting the water hardness of the machine. level is explained in Water Softening System section. If you turn your machine off by Rinse Aid indicator ( ) using On/Off key at the end of the programme, the Child Lock will be Please check the rinse aid indicator deactivated automatically.
  • Page 31: Water Cut-Off Warning

    restored E:02 icon will disappear after a while and the washing programme resumes. Overflowing warning If the machine intakes too much water or there is leakage at any of the components then the machine will detect this and E:01 icon will flash on the Programme indicator.
  • Page 32: Maintenance And Cleaning

    Maintenance and cleaning Service life of the product extends left on the filters. If there are food and frequently faced problems residues on filters, take them out and decrease if it is cleaned at regular clean well under running water. intervals.
  • Page 33: Cleaning The Hose Filter

    3. Press the two pawls on the coarse 4. Install the hose to tap. filter inwards and separate the (depends on the model) coarse filter from the assembly (C). Cleaning the impellers Clean the impellers at least once a week in order for the machine operates efficiently.
  • Page 34 Upper impeller Check if the holes on the upper impeller (2) are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to remove the upper impeller (C, D). Make sure that the nut is tightened well when installing the upper impeller.
  • Page 35: Troubleshooting

    Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
  • Page 36 Dishes are not dry at the end of cycle • Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no water will accumulate in them. • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary.
  • Page 37 Lime traces remain on dishes and glassware gains a misty appearance • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. •...
  • Page 38 Rust, discoloration or surface deterioration occurs on dishes • Salt leakage exists. >>> Salt may cause deterioration and oxidation on metal surfaces. Pay attention not to spill salt around the salt filling hole while adding salt. Make sure that the salt reservoir lid is tightly closed after finishing the filling process.
  • Page 39 Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
  • Page 40 A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.
  • Page 41 15 0298 01 00_AB_(EN)

Table of Contents