Safety Instructions; Specifications - BorMann Elite BLG4000 Manual

EN

SAFETY INSTRUCTIONS

• Carefully read this instruction manual before using the appliance, installing the gas pipe and/or connecting the gas cylinder. Keep this instruction manual for
future reference.
• This appliance is compliant with standard EN 484: 1997.
• The appliance is intended for outdoor use only. The use of the equipment indoors is prohibited.
• Keep the appliance away from flammable materials and heat sources. Never use the stove near open flames.
• Place the stove on horizontal and heat-resistant surfaces. Never place the stove on surfaces made of paper, wood, plastic or other flammable materials.
• Always make sure the appliance is not damaged before use. In case of damage, do not use the appliance and contact an authorized service centre.
• Do not modify or repair the appliance by yourself for any reason. Such actions may not be performed by unauthorized personnel. In the event of malfunction
or apparent failure, contact an authorized service centre.
• Do not use an appliance with damaged seals or in case of leakage due to wear and tear of the components. Replace all accessories before reusing the
appliance.
• Do not use the appliance for purposes other than cooking or heating liquids for the purpose of preparing food.
• Never leave the appliance unattended during use.
• Always keep the appliance out of the reach of children and pets.
• During operation, the stove may reach high temperatures. Always pay close attention when using it and avoid touching the metal parts when they are hot.
• Never move the stove during operation. Use protective gloves when touching any hot components.
• If you notice that there is a gas smell coming from the appliance, immediately switch off the stove and close the gas cylinder valve and contact an authorized
service centre.
• Use exclusively LPG gas cylinders, in accordance with TPED legislation.
• Turn off the gas supply from the gas cylinder to the stove after use.
• Replacement of the gas cylinder must be performed away from any ignition source.
• The length of the flexible tube must not exceed 1,5 m.
• Make sure that the flexible tube is not bent in any way. The tube must not come into contact with any warm surfaces.
• Make sure to regularly replace the flexible tube according to local regulations.
• The appliance should be connected to a suitable low pressure regulator, complying with EN16129 standards. Always use a low pressure regulator to connect
the gas cylinder to the stove. This regulator for I3+ (28-30/37) must exclusively have a constant rating of 37 mbar for propane and 30 mbar for butane. For
I3B/P (30), the regulator shall have a constant rating of 30 mbar.
• Always store the appliance in areas free of humidity, protected from environmental conditions or other factors that could damage it.
• Any repairs should only be carried out by qualified personnel at the appropriate authorized service centres.
• Avoid blocking the stove's Venturi burners. Check if the burner system is blocked before using the appliance.
• Any cookware used should have a diameter of 120mm to 200mm.
• Components that have been sealed by the manufacturer must not be altered by the user. Any modification of the appliance may be dangerous.

SPECIFICATIONS

Technical Data
Model
Burners (No.)
Burner Caps Diameter
Power
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the
performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's
product line with similar features and may not be included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must
only be carried out by technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The
manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.
3
BGL4000 BGL4400
1 2
1 x 77 mm 2 x 77 mm
1 x 1,1 kW 2 x 1,1 kW
WWW.NIKOLAOUTOOLS.GR
BGL5400 BGL6000
3 4
2 x 77 mm , 1 x 47 mm 4 x 77mm
2 x 1,1 kW , 1 x 0,7 kW 4 x 1,1 kW