Tyco FASTFLEX YN25 Manual

Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500
FASTFLEX
Model YN25, YB25, and YB28 Flexible Sprinkler Hose
700 mm to 3700 mm Nominal Assembly Lengths
General
Description
The Tyco FASTFLEX is a unique
®
sprinkler drop assembly comprised of
the following: branchline adapter nip-
ple, stainless steel flexible hose with
two slip nuts, sprinkler reducer, and
lightweight ceiling bracket compo-
nents. (Refer to Figure 1.)
Using FASTFLEX can save time and
costs since the system can be in-
stalled in false ceilings without cut-
ting and threading pipes associated
with installing a drop, armover, and el-
bows. FASTFLEX makes it possible to
test and charge the system with wa-
ter before the ceiling grid is installed.
Once the ceiling grid is in position, the
FASTFLEX hoses can be reshaped to
suit the final sprinkler location without
draining the system.
FASTFLEX flexible sprinkler hose is
installed quickly without large and ex-
pensive tools. Ideal projects are of-
fices, schools, libraries, hospitals,
and shopping complexes. FASTFLEX
sprinkler hoses are for use on wet pipe
sprinkler systems only.
FASTFLEX offers the following fea-
tures:
• Reduced labor costs. Using FAST-
FLEX will reduce labor costs by in-
creasing efficiency. The installation
rate is two to three times quick-
er when compared to traditional fit-
ting methods of installing sprinkler
drops.
• Reduced need to recut sprinkler
drops. It is not necessary to adjust
sprinkler location if ceiling alignment
and level are changed.
• More convenient work flow. Using
FASTFLEX eases bending and ma-
neuvering around ducts and trays in
congested spaces and for unusu-
al ceiling types and curved plaster-
board ceilings.
Page 1 of 10
• Construction advantage. Adjust-
ments can be made to ceiling levels
after installation without impacting
sprinklers and drops.
• Equipment cost savings. Using
FASTFLEX reduces cost by elim-
inating pipe wastage and reducing
the labor associated with cutting,
threading, and sealing pipe threads.
notice
The FAStFLeX flexible sprinkler hos-
es described herein must be installed
and maintained in compliance with
this document and with the applicable
standards recognized by the Approval
agency, in addition to the standards of
any other authorities having jurisdic-
tion. Failure to do so may impair the
performance of these devices.
The owner is responsible for maintain-
ing their fire protection system and de-
vices in proper operating condition.
The installing contractor or sprinkler
manufacturer should be contacted
with any questions.
JULY 2009
Technical
Data
Approvals
LPCB, VdS, FM, and UL
(Specific details for laboratory approv-
als are given in Table A, and the ap-
provals apply to the service conditions
indicated in the applicable Design Cri-
teria sections on pages 6 and 7.)
APSAD accepted per Table A.
CSTB accepted for all models and as-
sembly lengths.
Inlet Connections (Ref Fig. 1)
- ISO 7/1-R 1
- ISO 7/1-R 1-1/4
Outlet Connections (Ref Fig. 2)
- ISO 7/1-Rc 3/8
- 1/2 inch NPT
- 3/4 inch NPT
Nominal Assembly Lengths
Refer to Table A.
Construction (Ref. Fig. 1)
The Inlet Nipple is mild steel, and the
Flexible Hose is SS AISI 304. The con-
nection at each end of the Flexible
Hose utilizes a brass Slip Nut, NBR/CR
o-ring, and Nylon W6 washer. The
Sprinkler Reducer is mild steel. The
Reducer Bracket, Bar Fixing Clamps,
and Support Bar are pressed steel.
TFP720