Advertisement
Quick Links
Advertisement
Related Manuals for W&T 62008
Summary of Contents for W&T 62008
- Page 1 W&T Manual RS422 > Centronics Interface W&T Model 62008, 62009 Release 1.40...
- Page 2 W&T RS422 > Centronics Interface, 4+4 KByte, Model 62008 © 11/2005 by Wiesemann & Theis GmbH Subject to errors and changes: Since we can make mistakes, none of our statements should be used without checking. Please let us know of any mistakes or misunderstandings you are aware of, so that we can recognize and eliminate them quickly.
- Page 3 RS422 > Centronics Interface, 4+4 KByte, Model 62008 Interface 20mA > Centronics, 4+4KByte, Model 62008 Function Interface 62008 allows you to connect parallel printers or plotters to any data source to a serial RS422 port. Installation requires that the data format of the interfaces be adapted to the format of the data source.
- Page 4 W&T RS422 > Centronics Interface, 4+4 KByte, Model 62008 Manually setting the serial parameters In addition to Learn Mode, the interface allows you to set the serial parameters manually using DIL switches, which are accessible after opening the interface housing. The meaning of...
- Page 5 W&T RS422 > Centronics Interface, 4+4 KByte, Model 62008 Connector and pinouts The RS422 connection on the interface is configured as a 25- pin SUB-D female connector. The pinouts for this connector must in general be adapted to the pinouts of the data source when installing the device.
- Page 6 W&T RS422 > Centronics Interface, 4+4 KByte, Model 62008 Technical Specifications Baud rate: 300..76800 baud Data format: 7,8 data bits, No, Even, Odd Parity Handshake: DTR-, XON-/XOFF-Handshake Buffer: 8 KByte (4 KByte + 4 KByte overrun buffer) Power supply: AC adaptor provided Current draw: typ.
- Page 7 W&T RS422 > Centronics Interface, 1+1 KByte, Model 62009 RS422 > Centronics Interface, 1+1KByte, Model 62009 The 62009 Interface permits parallel printers or plotters to be connected to any data source having a serial RS422 port. Function When installing, the data format of the Interface must match the format used by the data source.
- Page 8 W&T RS422 > Centronics Interface, 1+1 KByte, Model 62009 The meaning of the DIL switches can be taken from the table below: baudrate data bit 1200 2400 4800 parity 9600 19200 38400 even 76800 learn mode The number of stop bits may be any. Only the format 7 data bits, no parity, 1 stop bit is not supported by Learn Mode of the interface.
- Page 9 W&T RS422 > Centronics Interface, 1+1 KByte, Model 62009 Connectors and pinouts The RS422 connection on the interface is configured as a 25- pin SUB-D female connector. The pinouts for this connector must in general be adapted to the pinouts of the data source when installing the device.
- Page 10 W&T RS422 > Centronics Interface, 1+1 KByte, Model 62009 Technical Data Baud rate: 300..76800 baud Data format: 7,8 data bits, No, Even, Odd Parity Handshake: DTR-, XON-/XOFF-Handshake Buffer: 2 KByte (1 KByte + 1 KByte overrun buffer) Power supply: AC adaptor provided Current draw: typ.
Need help?
Do you have a question about the 62008 and is the answer not in the manual?
Questions and answers