Page 3
W&T USB Isolators USB interfaces in stationary computers unfortunately have the basic drawback of having no galvanic isolation for the signal lines. In many applications in the consumer world this limitation is irrelevant, since the USB devices connected to the PC are generally supplied through the bus and do not have any reference to a second ground or to the ground conductor.
W&T USB Isolators Contents USB Isolator, 1kV, #33001 ........... 13 Function ................13 Supply voltage ..............13 Display Elements ..............14 Speed configuration ............14 Wiring Example ..............15 Technical Data ..............16...
USB Isolators USB Isolator, 1kV, #33001 Function The Wiesemann & Theis USB-Isolator #33001 provides galvanic isolation for low-speed and full-speed USB connections with an isolation voltage of at least 1000V DC. The Isolator eliminates ground loops and prevents current from flowing between the connected devices and the supply lines of the USB caused by potential differences.
Power Out LED indicates the voltage of the downstream side. Speed switching The USB-Isolator #33001 supports USB devices operating in low-speed mode at 1.5 MBit/s or full-speed mode at 12 MBit/s. Two small switches on the side of the Isolator labeled „Low Speed“...
W&T USB Isolators Wiring example upstream port downstream port (USB A plug) (USB A - socket) USB-Isolator #33001 slave host Mini USB connector Power adaptor 5V, 0,7A min. 1kV galvanic isolation Subject to error and alteration...
W&T USB Isolators Technical data USB speed: Configurable: Full Speed (12MBit/s), Low Speed (1.5 MBIt/s) Isolation voltage: min. 1kV DC (high isolation voltages on request) Power: Upstream-Port: USB-supplied Downstream-Port: 5V DC using included power supply Current draw: Upstream-Port: max. 8 mA Downstream-Port: max.